Plastics - Thermoplastic covering films for use in agriculture and horticulture

This document specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films used for covering permanent or temporary greenhouses and walking tunnels and low tunnels used for forcing and semi-forcing vegetable, fruit and flower crops.
Lay-flat perforated cover films are also in the scope of this document.
This specifies a classification for the durability of covering films and the test methods referred to in this document.
This document specifies also test methods for the determination of the chlorine and sulfur contents of films subjected to use.
This document is applicable to thermoplastic covering films used in agriculture and horticulture in Europe, in the thickness range 20 µm up to more than 250 µm, based on polyethylene and/or ethylene copolymers materials, of the following types: non-thermal films, thermal clear films and thermal diffusing films.
This document also defines guidance for installation, use and disposal of covering films. It defines the conventional expected lifetime, as well as rules that allow evaluating the remaining use potential in the event of a failure before the normal end-of-use date.
NOTE   These rules allow estimating the residual value of the films. These provisions only apply to the film itself and the damage it has undergone. Any other problem falls within the scope of professional practices and the general terms and conditions of sale.

Kunststoffe - Thermoplastische Abdeckfolien für den Einsatz in der Landwirtschaft und im Gartenbau

Dieses Dokument legt die Anforderungen an maßliche, mechanische, optische und thermische Eigenschaften von thermoplastischen Folien zur Verwendung als Abdeckung für ständige oder temporäre Gewächshäuser sowie begehbare Tunnel und niedrige Tunnel zur Verfrühung und teilweisen Verfrühung im Gemüse-, Obst- und Blumenanbau fest.
Flachgelegte perforierte Abdeckfolien werden ebenfalls durch den Anwendungsbereich dieses Dokuments Norm abgedeckt.
Dieses Dokument legt eine Klassifikation bezüglich der Beständigkeit von Abdeckfolien und der in diesem Dokument in Bezug genommenen Prüfverfahren fest.
Außerdem legt dieses Dokument auch Prüfverfahren für die Bestimmung des Chlor- und Schwefelgehaltes von gebrauchten Folien fest.
Dieses Dokument gilt für thermoplastische Abdeckfolien auf der Grundlage von Polyethylen- und/oder Ethylen-Copolymer-Werkstoffen mit Dicken von 20 µm bis mehr als 250 µm, die für den Einsatz in der Landwirtschaft und im Gartenbau in Europa bestimmt sind und zu folgenden Arten gehören: nicht-thermische Folien, thermisch klare Folien und thermisch diffuse Folien.
Darüber hinaus legt dieses Dokument Hinweise für den Einsatz, die Anwendung und die Entsorgung von Abdeckfolien fest. Sie legt die üblicherweise erwartete Lebensdauer sowie Regeln fest, die die Bewertung der im Falle eines Versagens noch vor Ablauf der Mindesthaltbarkeitsdauer verbleibenden Nutzbarkeit ermöglicht.
ANMERKUNG   Durch diese Regeln kann der Restwert der Folien geschätzt werden. Diese Vorgaben gelten nur für die Folie selbst und den an ihr eingetretenen Schaden. Alle sonstigen Probleme fallen in den Anwendungsbereich der branchenüblichen Praktiken und der allgemeinen Verkaufs- und Lieferbedingungen.

Plastiques - Films de couverture thermoplastiques pour utilisation en agriculture et horticulture

Le présent document spécifie les exigences relatives aux caractéristiques dimensionnelles, mécaniques, optiques et thermiques des films thermoplastiques utilisés pour couvrir les serres et les serres tunnel permanentes et temporaires ainsi que les petits tunnels pour le forçage et le semi-forçage des légumes, des fruits et des fleurs.
Les films de couverture à plat perforés sont aussi dans le domaine d’application du présent document.
Il spécifie une classification pour la durabilité des films de couverture et les méthodes d’essai auxquelles il est fait référence dans le présent document.
Le présent document définit également les méthodes d’essai à utiliser pour la détermination des teneurs en chlore et en soufre des films usagés.
Le présent document est applicable aux films de couverture thermoplastiques utilisés en agriculture et en horticulture en Europe, sur une plage d’épaisseur comprise entre 20 µm et plus de 250 µm, à base de matériaux de polyéthylène et/ou de copolymères d’éthylène, des types suivants : films non thermiques, films transparents thermiques et films diffusants thermiques.
Le présent document définit également des recommandations pour la mise en œuvre, l’utilisation et l’élimination des films de couverture. Il définit la durée de vie attendue conventionnelle, ainsi que les règles qui permettent l’évaluation du potentiel d’utilisation restant en cas de défaut avant la date normale de fin de vie.
NOTE   Ces règles permettent d’estimer la valeur résiduelle des films. Ces dispositions ne s’appliquent qu’au film lui-même et aux dégâts qu’il a subis. Tout autre problème tombe dans le domaine d’application des pratiques professionnelles et des conditions générales de vente.

Polimerni materiali - Prekrivne plastomerne folije za uporabo v kmetijstvu in vrtnarstvu

General Information

Status
Not Published
Publication Date
11-Jan-2026
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
17-Oct-2024
Due Date
18-Nov-2024
Completion Date
17-Oct-2024

Relations

Buy Standard

Draft
prEN 13206:2024
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2024
Polimerni materiali - Prekrivne plastomerne folije za uporabo v kmetijstvu in
vrtnarstvu
Plastics - Thermoplastic covering films for use in agriculture and horticulture
Kunststoffe - Thermoplastische Abdeckfolien für den Einsatz in der Landwirtschaft und
im Gartenbau
Plastiques - Films de couverture thermoplastiques pour utilisation en agriculture et
horticulture
Ta slovenski standard je istoveten z: prEN 13206
ICS:
65.040.30 Rastlinjaki in druge naprave Greenhouses and other
installations
83.140.10 Filmi in folije Films and sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2024
ICS 65.040.30; 83.140.10 Will supersede EN 13206:2017+A1:2020
English Version
Plastics - Thermoplastic covering films for use in
agriculture and horticulture
Plastiques - Films de couverture thermoplastiques Kunststoffe - Thermoplastische Abdeckfolien für den
pour utilisation en agriculture et horticulture Einsatz in der Landwirtschaft und im Gartenbau
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13206:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Types and use . 9
5 Materials . 9
6 Durability . 9
7 Requirements . 10
7.1 General requirements . 10
7.2 Requirement for appearance . 13
8 Test methods . 14
8.1 Determination of thickness . 14
8.2 Determination of width . 14
8.3 Determination of tensile characteristics . 14
8.4 Determination of impact resistance . 14
8.4.1 General. 14
8.4.2 Flat area . 14
8.4.3 Fold area. 14
8.5 Determination of elongation under a steady load (creep test) . 15
8.5.1 Principle . 15
8.5.2 Apparatus . 15
8.5.3 Test pieces . 16
8.5.4 Test conditions . 16
8.5.5 Test procedure . 16
8.5.6 Expression of results . 17
8.6 Determination of visible light transmission . 17
8.7 Determination of haze. 17
8.8 Determination of IR effectiveness (η ) (thermal clear and thermal diffusing films) . 17
ir
8.8.1 Principle . 17
8.8.2 Apparatus . 17
8.8.3 Test procedure . 18
8.8.4 Expression of results . 18
8.9 Determination of resistance to weathering . 18
8.9.1 Principle . 18
8.9.2 Exposure to xenon-arc lamps . 18
8.9.3 Procedure . 19
8.9.4 Calculation and expression of results . 19
8.10 Determination of the chlorine content of used films . 19
8.11 Determination of the sulfur content of used films . 19
8.12 Determination of the roll/sheet length . 19
9 Film acceptance, storage and handling . 20
9.1 Acceptance. 20
9.2 Storage and handling of rolls . 20
10 Designation . 20
11 Marking . 21
11.1 Marking on the packaging or label . 21
11.2 Marking on the packaging or label . 21
12 Instructions for storage, installation and use of covering films . 22
13 Design for recycling and end of life of covering films . 22
13.1 Design for mechanical recycling . 22
14 Removal and collection instructions of used covering films . 24
Annex A (informative) Exposure to other light sources . 25
Annex B (informative) Empirical correlation between durations of covering films exposed
to artificial weathering and a natural exposure . 29
Annex C (normative) Determination of the chlorine content by coulometry . 33
Annex D (normative) Determination of the sulfur content by ICP- OES technique . 37
Annex E (informative) Alternative method for the determination of chlorine and sulfur
contents by X-ray fluorescence . 42
Annex F (informative) Alternative methods for the determination of sulfur content by
ultraviolet fluorescence method or by coulometry . 44
Annex G (normative) Basic guidance for installation, use and disposal of covering films . 49
Annex H (informative) Industrial standard formats of films . 50
Bibliography . 51

European foreword
This document has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of
which is held by SIS.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13206:2017+A1:2020.
EN 13206:2017+A1:2020:
— Clause 5 on materials has been added;
— Clauses 10, 11 and 12 on designation, marking and instructions for storage, installation and use of
covering films, respectively, have been modified;
— Clause 13 on the design-for-recycling of end of life of covering films has been added;
— Clause 14 on removal and collection instructions of used silage stretch films has been modified,
referring to prEN 18109 for additional information;
— the normative Annex G has been modified to outline basic guidance for installation, use and
disposal of covering films.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Under preparation
1 Scope
This document specifies the requirements related to dimensional, mechanical, optical and thermal
characteristics of thermoplastic films used for covering permanent or temporary greenhouses and
walking tunnels and low tunnels used for forcing and semi-forcing vegetable, fruit and flower crops.
Lay-flat perforated cover films are also in the scope of this document.
This specifies a classification for the durability of covering films and the test methods referred to in this
document.
This document specifies also test methods for the determination of the chlorine and sulfur contents of
films subjected to use.
This document is applicable to thermoplastic covering films used in agriculture a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.