prEN 3475-404

SLOVENSKI STANDARD
oSIST prEN 3475-404:2024
01-junij-2024
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
404. del: Toplotni šok
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : Thermal
shock
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren, Teil
404: Thermischer Schock
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie
404 : Chocs thermiques
Ta slovenski standard je istoveten z: prEN 3475-404
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3475-404:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3475-404:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3475-404:2024


DRAFT
EUROPEAN STANDARD
prEN 3475-404
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 49.060 Will supersede EN 3475-404:2002
English Version

Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 404 : Thermal shock
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essai - Partie 404 : Chocs Luftfahrtverwendung - Prüfverfahren, Teil 404:
thermiques Thermischer Schock
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3475-404:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3475-404:2024
prEN 3475-404:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of a specimen . 4
4.1 Insulated conductor . 4
4.2 Cable jacket . 4
5 Apparatus . 4
6 Method . 4
6.1 Procedure (applicable for insulated conductors and jacketed cables) .
...