EN 12629-5-2:2003+A1:2010
(Main)Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of pipes in the horizontal axis and similar elements from concrete.
EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.
1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard establishes safety requirements and/or methods of protection which applies to these machines.
1.3 This European standard applies to the pipe making machines manufacturing in horizontal axis which may form an integral part of a pipe making process plant.
1.4 This document is not applicable to pipe making machines manufacturing in the horizontal axis, which are manufactured before the date of publication of this document by CEN.
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-2: Rohrmaschinen mit Fertigung in horizontaler Lage
Dieser Teil von EN 12629, zusammen mit EN 12629-1:2000+A1:2010, gilt für Maschinen für die
Herstellung von Rohren und ähnlichen Betonelementen mit Fertigung in horizontaler Lage.
EN 12629-1:2000+A1:2010 spezifiziert allgemeine Anforderungen, die für Maschinen für die Herstellung von
Bauprodukten aus Beton und Kalksandsteinmassen gelten.
Dieses Dokument beschreibt die zusätzlichen Anforderungen für und/oder Abweichungen von
EN 12629-1:2000+A1:2010, die spezifisch für die Maschinen sind, die es abdeckt."
1.2 !Diese Europäische Norm behandelt alle signifikanten Gefährdungen, die auf diese Maschinen
zutreffen, wenn sie bestimmungsgemäß und unter den Bedingungen des Missbrauchs, die vernünftigerweise
vom Hersteller vorhersehbar sind, verwendet werden (siehe Abschnitt 4). Diese Europäische Norm spezifiziert
die entsprechenden technischen Maßnahmen zur Beseitigung oder Verminderung der Risiken, die von den
signifikanten Gefährdungen ausgehen."
!gestrichener Text"
Diese Norm legt Sicherheitsanforderungen und/oder Schutzverfahren fest, die für diese Maschinen gelten.
1.3 Diese Europäische Norm gilt für Rohrmaschinen mit Fertigung in horizontaler Lage, die als integraler
Bestandteil einer Rohrherstellungsanlage dienen können.
1.4 !Dieses Dokument gilt nicht für Rohrmaschinen mit Fertigung in horizontaler Lage, die vor dem
Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden."
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-2: Machines pour la fabrication de tuyaux dans l'axe horizontal
!La présente partie de l'EN 12629, utilisée avec l'EN 12629-1:2000+A1 :2010, s'applique aux machines
utilisées pour la fabrication de tuyaux dans l'axe horizontal et de produits similaires en béton.
L'EN 12629-1:2000+A1 :2010 spécifie les prescriptions générales applicables aux machines pour la fabrication
de produits de construction en béton et silico-calcaire.
Le présent document spécifie les prescriptions supplémentaires et/ou les dérogations à l’EN 12629-1:2000+A1:2010
spécifiques aux machines concernées."
1.2 !La présente Norme européenne traite tous les phénomènes dangereux significatifs spécifiques
à ces machines, lorsqu’elles sont utilisées normalement et dans des conditions de mauvais usage que le fabricant
peut raisonnablement prévoir (voir Article 4). La présente Norme européenne spécifie les mesures techniques
appropriées pour éliminer ou réduire les risques dus aux phénomènes dangereux significatifs."
!texte supprimé"
La présente norme spécifie les prescriptions de sécurité et/ou méthodes de protection qui s’appliquent
à ces machines.
1.3 La présente Norme européenne s’applique aux machines de fabrication des tuyaux travaillant sur l’axe vertical
qui peuvent former partie intégrante d’une installation de fabrication de tuyaux.
1.4 !Le présent document ne s'applique pas aux machines pour la fabrication de tuyaux dans l'axe horizontal
fabriquées avant la date de publication du présent document par le CEN."
Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-2. del: Stroji za izdelavo cevi po vodoravni osi
Ta del EN 12629 skupaj z EN 12629-1:2000+A1:2010 velja za stroje za izdelavo cevi po vodoravni osi in podobnih elementov iz betona. EN 12629-1:2000+A1:2010 določa splošne zahteve, ki veljajo za stroje za izdelavo gradbenih proizvodov iz betona in apnenega peščenca. Ta dokument določa dodatne zahteve in/ali odstopanja od EN 12629-1:2000+A1:2010, specifične za stroje, ki jih zajema. Ta evropski standard obravnava vse pomembne nevarnosti, ki se nanašajo na te stroje, kadar se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4). Ta evropski standard določa primerne tehnične ukrepe za odpravo ali zmanjševanje tveganj, ki se pojavijo zaradi pomembnih nevarnosti. Ta standard vzpostavlja varnostne zahteve in/ali zaščitne metode, ki veljajo za te stroje. Ta evropski standard velja za stroje za izdelavo cevi po vodoravni osi, ki so lahko integralni del predelovalnega obrata za izdelavo cevi.
General Information
- Status
- Published
- Publication Date
- 31-Aug-2010
- Technical Committee
- CEN/TC 151 - Construction equipment and building material machines - Safety
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 19-May-2021
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 10-Jul-2010
Overview
EN 12629-5-2:2003+A1:2010 is a CEN Type C safety standard for pipe making machines manufacturing in the horizontal axis. Intended to be used together with EN 12629-1:2000+A1:2010 (Common requirements), it defines additional safety requirements and deviations specific to horizontal-axis concrete and calcium‑silicate pipe production equipment - in particular spinning machines and related machine elements. The standard addresses significant hazards when machines are used as intended or under reasonably foreseeable misuse and includes Amendment 1 (2010).
Key topics and requirements
- Scope and relationship: Supplements EN 12629-1; applies to machines forming an integral part of pipe-making process plants. Not applicable to units manufactured before its publication.
- Risk approach: Aligned with EN ISO 12100 (basic concepts and design principles) and EN 1050 (principles for risk assessment). Manufacturers must perform risk assessments and apply technical measures to eliminate or reduce hazards.
- Hazard identification: Lists significant hazards for horizontal spinning machines:
- Crushing, shearing, entanglement, drawing-in/trapping
- Friction/abrasion, noise, material contact (concrete exposure), ejection of parts
- Slip, trip and fall (wet floors around machines)
- Machine-specific measures: Defines guarding and protective measures by hazard zone (Annex B), covering mobile feeders, compacting rollers, vibrating rollers, moulds, hoppers and transmissions.
- Verification and documentation: Verification follows EN 12629-1. Requires information for use, marking, and safety instructions; includes a practical recommendation for floor drainage to manage water and reduce slip risks.
- Informative annexes: Annex A (definitions/illustrations), Annex B (hazard zones), Annex ZA (relationship to EU Machinery Directive 2006/42/EC).
Practical applications - who uses it
- Machine manufacturers and OEMs designing or supplying horizontal-axis pipe spinning machines.
- Plant designers and integrators specifying equipment for precast concrete pipe production lines.
- Safety managers and compliance officers ensuring machinery meets European safety requirements and supports conformity with the Machinery Directive (2006/42/EC).
- Test and inspection bodies performing verification against normative clauses and hazard-zone protections.
Related standards
- EN 12629-1:2000+A1:2010 - Common requirements for machines for the manufacture of constructional products
- EN ISO 12100-1 / -2 - Safety of machinery: basic concepts and design principles
- EN 1050:1996 - Principles for risk assessment
- Machinery Directive 2006/42/EC - essential requirements linkage (see Annex ZA)
Keywords: EN 12629-5-2, pipe making machines, horizontal axis, safety standard, spinning machines, concrete pipe production, CEN, risk assessment, hazard zones, Machinery Directive.
Frequently Asked Questions
EN 12629-5-2:2003+A1:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis". This standard covers: This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of pipes in the horizontal axis and similar elements from concrete. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. 1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard establishes safety requirements and/or methods of protection which applies to these machines. 1.3 This European standard applies to the pipe making machines manufacturing in horizontal axis which may form an integral part of a pipe making process plant. 1.4 This document is not applicable to pipe making machines manufacturing in the horizontal axis, which are manufactured before the date of publication of this document by CEN.
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for the manufacture of pipes in the horizontal axis and similar elements from concrete. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. 1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard establishes safety requirements and/or methods of protection which applies to these machines. 1.3 This European standard applies to the pipe making machines manufacturing in horizontal axis which may form an integral part of a pipe making process plant. 1.4 This document is not applicable to pipe making machines manufacturing in the horizontal axis, which are manufactured before the date of publication of this document by CEN.
EN 12629-5-2:2003+A1:2010 is classified under the following ICS (International Classification for Standards) categories: 91.220 - Construction equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12629-5-2:2003+A1:2010 has the following relationships with other standards: It is inter standard links to EN 12629-5-2:2003/FprA1, EN 12629-5-2:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12629-5-2:2003+A1:2010 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12629-5-2:2003+A1:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-2: Beton-Rohrmaschinen mit Fertigung in horizontaler LageMachines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-2: Machines pour la fabrication de tuyaux dans l'axe horizontalMachines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 12629-5-2:2003+A1:2010SIST EN 12629-5-2:2004+A1:2010en,fr01-december-2010SIST EN 12629-5-2:2004+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12629-5-2:2003+A1
September 2010 ICS 91.220 Supersedes EN 12629-5-2:2003English Version
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-2: Machines pour la fabrication de tuyaux dans l'axe horizontal
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-2: Beton-Rohrmaschinen mit Fertigung in horizontaler Lage This European Standard was approved by CEN on 3 November 2003 and includes Amendment 1 approved by CEN on 5 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12629-5-2:2003+A1:2010: ESIST EN 12629-5-2:2004+A1:2010
Definitions of terms . 11Annex B (informative)
Hazard zones . 12Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 13 SIST EN 12629-5-2:2004+A1:2010
When provisions of this type C document are different from those, which are stated in type A or B documents, the provisions of this type C document take precedence over the provisions of the other documents, for machines that have been designed and built according to the provisions of this type C document.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific for the pipe making machines manufacturing in the horizontal axis as described in 1.1. With the aim of clarifying the intentions of the document it should be noticed that the following assumptions were made when producing it: specific conditions of use or environmental conditions out of the scope of the document shall be the subject of negotiations between the manufacturer and the user/owner, the equipment will only be used by competent and designated persons,
the place of use/installation is adequately lit,
all operations are carried out by specially trained operators."
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...