EN 1281-1:1997
(Main)Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
This Part of this European Standard specifies dimensional and gauging requirements for cones and sockets and performance requirements for latching connectors intended for use in medical devices, e.g. in breathing systems, anaesthetic gas scavenging systems and vaporizers. This European Standard does not specify the medical devices and accessories on which these connectors are to be provided. NOTE 1: It is expected that requirements on the use of suitable materials and for the application of this standard will be included in particular standards for specific medical devices and accessories. NOTE 2: Requirements for screw-threaded weight-bearing conical connectors are specified in Part 2 of this standard.
Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche Konen
Dieser Teil dieser Europäischen Norm legt Anforderungen an Masse und Lehren für männliche und weibliche Konen und Leistungsanforderungen für Schnapp- konnerktoren zur Verwendung in medizinischen Geräten fest, z B. in AtemsystemenAnästhesiegasfortleitungssystemen und Verdunstën. Diese Europäischen Norm legt keine Anforderungen für medizinische Geräte und Zubehör fest, bei denen diese Konnektoren zu verwenden sind.
Matériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femelles
La présente norme européenne spécifie les prescriptions fondamentales concernant les dimensions et les calibres pour les raccords mâles et femelless, ainsi queles prescriptions relatives aux performances des raccords avec système de blo- cage destinés aux disposifs médicaux : systèmes respiratoire, système d'évacu- ation de gaz d'anesthésie en excès et évaporateurs, par exemple. Cette norme ne spécifie pas quels sont les dispositifs médicaux et les accessoires sur lesquels ces raccords doivent être montés.
Anestezijska in dihalna oprema - Stožčasti priključki - 1. del: Vtikači in vtičnice
General Information
- Status
- Withdrawn
- Publication Date
- 21-Jan-1997
- Withdrawal Date
- 14-May-2004
- Technical Committee
- CEN/TC 215 - Respiratory and anaesthetic equipment
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-May-2004
- Completion Date
- 15-May-2004
- Directive
- 93/42/EEC - Medical devices
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.
TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
Sponsored listings
Frequently Asked Questions
EN 1281-1:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets". This standard covers: This Part of this European Standard specifies dimensional and gauging requirements for cones and sockets and performance requirements for latching connectors intended for use in medical devices, e.g. in breathing systems, anaesthetic gas scavenging systems and vaporizers. This European Standard does not specify the medical devices and accessories on which these connectors are to be provided. NOTE 1: It is expected that requirements on the use of suitable materials and for the application of this standard will be included in particular standards for specific medical devices and accessories. NOTE 2: Requirements for screw-threaded weight-bearing conical connectors are specified in Part 2 of this standard.
This Part of this European Standard specifies dimensional and gauging requirements for cones and sockets and performance requirements for latching connectors intended for use in medical devices, e.g. in breathing systems, anaesthetic gas scavenging systems and vaporizers. This European Standard does not specify the medical devices and accessories on which these connectors are to be provided. NOTE 1: It is expected that requirements on the use of suitable materials and for the application of this standard will be included in particular standards for specific medical devices and accessories. NOTE 2: Requirements for screw-threaded weight-bearing conical connectors are specified in Part 2 of this standard.
EN 1281-1:1997 is classified under the following ICS (International Classification for Standards) categories: 11.040.10 - Anaesthetic, respiratory and reanimation equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1281-1:1997 has the following relationships with other standards: It is inter standard links to EN ISO 5356-1:2004, EN 1281-1:1997/A1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1281-1:1997 is associated with the following European legislation: EU Directives/Regulations: 93/42/EEC; Standardization Mandates: M/023. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1281-1:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 1: Männliche und weibliche KonenMatériel respiratoire et d'anesthésie - Raccords coniques - Partie 1: Raccords mâles et femellesAnaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 1281-1:1997SIST EN 1281-1:2000en01-januar-2000SIST EN 1281-1:2000SLOVENSKI
STANDARD
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...