Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects - Pipe support (ISO 24200:2022)

This document specifies the requirements for design including shape and dimensions, material as well as strength for pipe support. Applicable pipe size range varies depending on support types. This document covers topside systems for fixed or floating offshore oil and gas projects. This document is applicable to design temperature of support within the range between –46 °C up to 200 °C.
This document is limited to metallic pipes, covering the following pipe supports:
—    clamped shoe;
—    welded shoe;
—    U-bolt;
—    U-strap;
—    bracing for branch connection;
—    trunnion and stanchion;
—    guide support (guide, hold-down, guide and hold-down, line stop).

Erdöl-, petrochemische und Erdgasindustrie - Schüttgut für Offshore-Projekte - Rohrabstützung (ISO 24200:2022)

Industries pétrolière, pétrochimique et du gaz naturel - Matériels de base pour les projets en mer - Supports de tuyauterie (ISO 24200:2022)

Le présent document spécifie les exigences de conception, notamment la forme et les dimensions, les matériaux ainsi que la résistance des supports de tuyauterie. La plage de dimensions applicable des tuyauteries varie selon les types de supports. Le présent document couvre les systèmes des superstructures dans le cadre de projets de pétrole et de gaz fixes ou flottants en mer. Le présent document s'applique à une température de conception comprise entre –46 °C et 200 °C pour les supports.
Il se limite aux tuyauteries métalliques, couvrant les supports de tuyauterie suivants :
—    patin à collier ;
—    patin soudé ;
—    étrier ;
—    collier plat ;
—    raidisseur pour piquage ;
—    tourillon et chandelle ;
—    support de guide (guide, anti-soulèvement, guide et anti-soulèvement, butée axiale).

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Razsuti material za priobalne projekte - Podpora za cevi (ISO 24200:2022)

Ta dokument določa zahteve za načrtovanje, vključno z obliko in merami, materialom in trdnostjo za podporo za cevi od NPS 2 do NPS 36, razen U-objemk in U-trakov. Ta dokument obravnava nadvodne sisteme za nepremične ali plavajoče naftne in plinske priobalne projekte. Ta dokument se uporablja za načrtovano temperaturo podpore v območju od –23 °C do 200 °C. Omejen je samo na kovinske cevi.
Ta dokument obravnava zahteve za naslednje podpore za cevi:
–   objemni nosilec;
–   varjeni nosilec;
–   U-objemka;
–   U-trak;
–   oporniki za priključitev razvodov;
–   valjasti in sidrni podpornik;
–   podporniki z vodili (bočno zadrževanje, navpično zadrževanje, bočno/navpično zadrževanje).
Ta dokument obravnava zahteve za načrtovanje zgoraj navedenih elementov, zato ne zajema nujno vseh ostalih tipov podpor za cevi.

General Information

Status
Published
Publication Date
24-May-2022
Withdrawal Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-May-2022
Completion Date
25-May-2022

Buy Standard

Standard
EN ISO 24200:2022
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2022
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -
Razsuti material za priobalne projekte - Podpora za cevi (ISO 24200:2022)
Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects
- Pipe support (ISO 24200:2022)
Erdöl-, petrochemische und Erdgasindustrie - Schüttgut für Offshore-Projekte (ISO
24200:2022)
Industries pétrolière, pétrochimique et du gaz naturel - Matériels de base pour les projets
en mer - Supports de tuyauterie (ISO 24200:2022)
Ta slovenski standard je istoveten z: EN ISO 24200:2022
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 24200
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 75.180.10
English Version
Petroleum, petrochemical and natural gas industries - Bulk
material for offshore projects - Pipe support (ISO
24200:2022)
Industries pétrolière, pétrochimique et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie -
Matériels de base pour les projets en mer - Supports de Schüttgut für Offshore-Projekte (ISO 24200:2022)
tuyauterie (ISO 24200:2022)
This European Standard was approved by CEN on 1 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24200:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 24200:2022) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24200:2022 has been approved by CEN as EN ISO 24200:2022 without any modification.

INTERNATIONAL ISO
STANDARD 24200
First edition
2022-05
Petroleum, petrochemical and natural
gas industries — Bulk material for
offshore projects — Pipe support
Industries pétrolière, pétrochimique et du gaz naturel — Matériels de
base pour les projets en mer — Supports de tuyauterie
Reference number
ISO 24200:2022(E)
ISO 24200:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 24200:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 3
4 General . 4
5 Support selection guideline . 4
6 Design and material requirements .5
6.1 Clamped shoe . 5
6.1.1 Key parameters . 5
6.1.2 Size/Dimension . 5
6.1.3 Material. 7
6.1.4 Application . 7
6.2 Welded shoe . 8
6.2.1 Key parameters . 8
6.2.2 Size/Dimension . 8
6.2.3 Material.12
6.2.4 Application .12
6.3 U-bolt . 13
6.3.1 Key parameters .13
6.3.2 Size/Dimension . 13
6.3.3 Application .15
6.4 U-strap . 15
6.4.1 Key parameters .15
6.4.2 Size/Dimension . 16
6.4.3 Application . 18
6.5 Bracing for branch connection . 18
6.5.1 Key parameters . 18
6.5.2 Size/Dimension . 18
6.5.3 Application . 21
6.6 Trunnion and stanchion . 21
6.6.1 Trunnion . 21
6.6.2 Stanchion . 25
6.7 Guide, hold-down, guide and hold-down and line-stop support .29
6.7.1 Guide . 29
6.7.2 Guide and hold-down. 31
6.7.3 Line-stop . 33
6.8 Guide, guide and hold-down and line-stop support – With hole . 35
6.8.1 Guide . 35
6.8.2 Hold-down .38
6.8.3 Guide and hold-down. 41
6.8.4 Line-stop .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.