EN 840-6:2004
(Main)Mobile waste containers - Part 6: Safety and health requirements
Mobile waste containers - Part 6: Safety and health requirements
This part 6 of the European Standard provides the most essential safety and health requirements for mobile waste containers, not including hazardous wastes containers.
Fahrbare Abfallsammelbehälter - Teil 6: Sicherheits- und Gesundheitsschutzanforderungen
Dieser Teil der Europäischen Normenreihe EN 840 enthält die wichtigsten Sicherheits- und Gesundheitsanforderungen für fahrbare Abfallsammelbehälter. Er behandelt keine Behälter für gefährliche Abfälle.
Conteneurs roulants à déchets - Partie 6: Exigences d'hygiène et de sécurité
Cette partie de la Norme Européenne EN 840 indique les exigences essentielles en matière de sécurité et de santé pour les conteneurs mobiles à déchets, étant exclus les conteneurs pour déchets dangereux.
Premični zabojniki za odpadke - 6. del: Varnostne in zdravstvene zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHFahrbare Abfallsammelbehälter - Teil 6: Sicherheits- und GesundheitsschutzanforderungenConteneurs roulants a déchets - Partie 6: Exigences d'hygiene et de sécuritéMobile waste containers - Part 6: Safety and health requirements13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 840-6:2004SIST EN 840-6:2004en01-maj-2004SIST EN 840-6:2004SLOVENSKI
STANDARDSIST EN 840-6:2000/A1:2001SIST EN 840-6:20001DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 840-6March 2004ICS 13.030.40Supersedes EN 840-6:1997English versionMobile waste containers - Part 6: Safety and healthrequirementsConteneurs roulants à déchets - Partie 6: Exigencesd'hygiène et de sécuritéFahrbare Abfallsammelbehälter - Teil 6: Sicherheits- undGesundheitsschutzanforderungenThis European Standard was approved by CEN on 10 December 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 840-6:2004: ESIST EN 840-6:2004
A-Deviations.9 Bibliography.10
Mobile waste containers − Part 5: Performance requirements and test methods. 3 General requirements of construction 3.1 The container shall be constructed so that when it is unloaded or loaded with a nominal load, it has a secure fit on an approved compatible lifting device and must be automatically locked safely into the lifting device during the tilting and emptying operation. 3.2 The container shall be safely fitted to the lifting device of the vehicle without being carried or lifted manually. 3.3 Wheeled containers shall be constructed so that under test conditions according to EN 840-5 the pushing and pulling forces to keep the container moving shall not exceed the values given in EN 840-5:2004, 4.9. Pushing and pulling forces shall be declared in the instructions for use (see clause 11). 3.4 Dur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.