EN 1729-2:2023/prA1

SLOVENSKI STANDARD
01-februar-2025
Pohištvo - Stoli in mize za vzgojno-izobraževalne ustanove - 2. del: Varnostne
zahteve in preskusne metode - Dopolnilo A1
Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements
and test methods
Möbel - Stühle und Tische für Bildungseinrichtungen - Teil 2: Sicherheitstechnische
Anforderungen und Prüfverfahren
Meubles - Chaises et tables pour les établissements d'enseignement - Partie 2 :
Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1729-2:2023/prA1
ICS:
97.140 Pohištvo Furniture
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 1729-2:2023
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2025
ICS 97.140
English Version
Furniture - Chairs and tables for educational institutions -
Part 2: Safety requirements and test methods
Meubles - Chaises et tables pour les établissements Möbel - Stühle und Tische für Bildungseinrichtungen -
d'enseignement - Partie 2 : Exigences de sécurité et Teil 2: Sicherheitstechnische Anforderungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 207.

This draft amendment A1, if approved, will modify the European Standard EN 1729-2:2023. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1729-2:2023/prA1:2025 E
worldwide for CEN national Members.

Contents Page
1 Modification to Clause 2, “Normative references” . 3
2 Modification to Clause 2, “Normative references” . 3
3 Modification to 4.3, “Sequence of testing” . 3
4 Modification to 5.1, “General safety requirements” . 4
5 Modification to 6.1, “General” . 4
6 Modification to 6.2.1, “General” . 4
7 Modification to 6.2.2, “Forwards overturning” . 4
8 Modification to 6.2.3.1, “Sideways overturning of chairs without armrests” . 4
9 Modification to 6.2.3.2, “Sideways overturning of chairs with armrests” . 4
10 Modification to 6.2.4, “Rearwards overturning for all chairs with backrests” . 4
11 Modification to 6.2.4, “Rearwards overturning for all chairs with backrests” . 4
12 Modification to
...