Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors - Amendment 1 (ISO 5356-2:2012/Amd 1:2019)

This part of ISO 5356 specifies dimensional requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories. This part of ISO 5356 specifies requirements for the following screw-threaded, weight-bearing conical connectors: - 22 mm connectors; - 22 mm/15 mm coaxial connectors. Requirements for the application of screw-threaded, weight-bearing conical connectors are not included in this part of ISO 5356, but are or will be given in the relevant International Standards for specific medical devices and accessories.

Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 2: Gewichtstragende Konnektoren mit Schraubgewinde - Änderung 1 (ISO 5356-2:2012/Amd 1:2019)

ISO 5356-2:2012 specifies dimensional requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories.
ISO 5356-2:2012 specifies requirements for the following screw-threaded, weight-bearing conical connectors:
22 mm connectors;
22/15 mm coaxial connectors.

Matériel d'anesthésie et de réanimation respiratoire - Raccords coniques - Partie 2: Raccords à vis pouvant supporter un certain poids - Amendement 1 (ISO 5356-2:2012/Amd 1:2019)

Anestezijska in respiratorna oprema - Konični priključki - 2. del: Nosilni priključki z navojem - Dopolnilo A1 (ISO 5356-2:2012/Amd 1:2019)

Ta del standarda ISO 5356 določa dimenzijske zahteve za nosilne konične priključke z navojem za uporabo z inhalacijskimi anestezijskimi pripomočki in respiratorno opremo. Takšni priključki so namenjeni za montažo težkih pripomočkov. Ta del standarda ISO 5356 določa zahteve za naslednje nosilne konične priključke z navojem: – 22 mm priključki; – 22 mm/15 mm koaksialni priključki. Zahteve za uporabo nosilnih koničnih priključkov z navojem niso vključene v ta del standarda ISO 5356, vendar so podane ali bodo podane v ustreznih mednarodnih standardih za posebno medicinsko opremo in pripomočke.

General Information

Status
Published
Publication Date
24-Sep-2019
Withdrawal Date
30-Mar-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Sep-2019
Completion Date
25-Sep-2019

Relations

Buy Standard

Amendment
EN ISO 5356-2:2013/A1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2019
Anestezijska in respiratorna oprema - Konični priključki - 2. del: Nosilni priključki z
navojem - Dopolnilo A1 (ISO 5356-2:2012/Amd 1:2019)
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded
weight-bearing connectors - Amendment 1 (ISO 5356-2:2012/Amd 1:2019)
Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 2: Gewichtstragende
Konnektoren mit Schraubgewinde - Änderung 1 (ISO 5356-2:2012/Amd 1:2019)
Matériel d'anesthésie et de réanimation respiratoire - Raccords coniques - Partie 2:
Raccords à vis pouvant supporter un certain poids - Amendement 1 (ISO 5356-
2:2012/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 5356-2:2012/A1:2019
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 5356-2:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 11.040.10
English Version
Anaesthetic and respiratory equipment - Conical
connectors - Part 2: Screw-threaded weight-bearing
connectors - Amendment 1 (ISO 5356-2:2012/Amd
1:2019)
Matériel d'anesthésie et de réanimation respiratoire - Anästhesie- und Beatmungsgeräte - Konische
Raccords coniques - Partie 2: Raccords à vis pouvant Konnektoren - Teil 2: Gewichtstragende Konnektoren
supporter un certain poids - Amendement 1 (ISO 5356- mit Schraubgewinde - Änderung 1 (ISO 5356-
2:2012/Amd 1:2019) 2:2012/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 5356-2:2012; it was approved by CEN on 15 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5356-2:2012/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 5356-2:2012/A1:2019) has been prepared by Technical Committee ISO/TC 121
"Anaesthetic and respiratory equipment" in collaboration with Technical Committee CEN/TC 215
“Respiratory and anaesthetic equipment” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 5356-2:2012/Amd 1:2019 has been approved by CEN as EN ISO 5356-2:2012/A1:2019
without any modification.
SIST EN I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.