Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm

This document specifies the requirements relating to:
Titanium alloy TI-P64001
Solution treated and aged
Bar for machining
D ≤ 75 mm
for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001 - Lösungsgeglüht und ausgelagert - Stangen zum Zerspanen - D ≤ 75 mm

Diese Europäische Norm legt die Anforderungen an:
Titanlegierung TI P64001
Lösungsgeglüht und ausgelagert
Stangen zum Zerspanen
D ≤ 75 mm
zur Anwendung in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 - Mis en solution et revenu - Barres pour usinage - D ≤ 75 mm

Aeronavtika - Titanova zlitina TI-P64001 - Topilno žarjena in starana - Palice za obdelavo - D ≤ 75 mm

Ta dokument določa zahteve, ki se nanašajo na:
titanove zlitine TI-P64001,
topilno žarjene in starane,
palice za obdelavo,
D ≤ 75 mm,
za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
02-Apr-2019
Withdrawal Date
30-Oct-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Apr-2019
Completion Date
03-Apr-2019

Buy Standard

Standard
EN 3314:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2019
$HURQDYWLND7LWDQRYD]OLWLQD7,37RSLOQRåDUMHQDLQVWDUDQD3DOLFH]D
REGHODYR'”PP
$HURVSDFHVHULHV7LWDQLXPDOOR\7,36ROXWLRQWUHDWHGDQGDJHG%DUIRU
PDFKLQLQJ'”PP
/XIWXQG5DXPIDKUW7LWDQOHJLHUXQJ7,3/|VXQJVJHJOKWXQGDXVJHODJHUW
6WDQJHQ]XP=HUVSDQHQ'”PP
6pULHDpURVSDWLDOH$OOLDJHGHWLWDQH7,30LVHQVROXWLRQHWUHYHQX%DUUHVSRXU
XVLQDJH'”PP
Ta slovenski standard je istoveten z: EN 3314:2019
ICS:
49.025.30 Titan Titanium
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3314
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.025.30
English Version
Aerospace series - Titanium alloy TI-P64001 - Solution
treated and aged - Bar for machining - D ≤ 75 mm
Série aérospatiale - Alliage de titane TI-P64001 - Mis Luft- und Raumfahrt - Titanlegierung TI-P64001 -
Lösungsgeglüht und ausgelagert - Stangen zum
en solution et revenu - Barres pour usinage - D ≤ 75
mm Zerspanen - D ≤ 75 mm
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3314:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5

European foreword
This document (EN 3314:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.