EN 2467:2024
(Main)Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
This document specifies the requirements relating to:
Steel X2CrNi18-9 (1.4307)
Air melted
Softened
Plates, sheets and strips
0,4 mm ≤ a ≤ 20 mm
520 MPa ≤ Rm ≤ 670 MPa
for aerospace applications.
W. nr: 1.4307.
ASD-STAN designation: FE-PA3901.
Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Lufterschmolzen - Weichgeglüht - Platten, Bleche und Bänder - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Dieses Dokument legt die Anforderungen an:
Stahl X2CrNi18 9 (1.4307)
Lufterschmolzen
Weichgeglüht
Platten, Bleche und Bänder
0,4 mm ≤ a ≤ 20 mm
520 MPa ≤ Rm ≤ 670 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
Werkstoffnummer: 1.4307.
ASD STAN-Werkstoffbezeichnung: FE PA3901.
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Élaboré à l'air - Adouci - Plaques, tôles et bandes - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Le présent document spécifie les exigences relatives à :
Acier X2CrNi18-9 (1.4307)
Élaboré à l’air
Adouci
Plaques, tôles et bandes
0,4 mm ≤ a ≤ 20 mm
520 MPa ≤ Rm ≤ 670 MPa
pour les applications aérospatiales.
W.nr : 1.4307.
Désignation ASD-STAN : FE-PA3901.
Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Taljeno na zraku - Mehčano - Plošče, pločevina in trakovi - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X2CrNi18-9 (1.4307),
taljeno na zraku,
mehčano,
plošče, pločevino in trakove,
0,4 mm ≤ a ≤ 200 mm,
520 MPa ≤ Rm ≤ 670 MPa,
za uporabo v aeronavtiki.
W. Nr: 1.4307.
Oznaka ASD-STAN: FE-PA3901.
General Information
Relations
Overview
EN 2467:2024 specifies material and delivery requirements for steel X2CrNi18-9 (1.4307) intended for aerospace applications. This European Standard (approved 19 May 2024) applies to air-melted, softened, rolled plates, sheets and strips with thickness a in the range 0.4 mm ≤ a ≤ 20 mm and tensile strength in the range Rm 520–670 MPa (with a reduced upper limit for the thickest band). The material is identified by W. nr 1.4307 and by ASD‑STAN designation FE-PA3901.
EN 2467:2024 supersedes the 2007 edition and is published in accordance with aerospace series rules. Normative references include EN 4700-001 (technical specification for plates, sheet and strip) and EN 2951 (micrographic determination of non‑metallic inclusions).
Key Topics
- Material designation: Steel X2CrNi18-9 (1.4307), composition limits for C, Si, Mn, P, S, Cr and Ni as listed in the standard.
- Melting and production: Air melted; rolled plates, sheets and strips.
- Delivery condition: Softened (delivery code U); specified heat treatment range 1 000 °C ≤ θ ≤ 1 100 °C with water or air/quench options as indicated.
- Dimensions & strength: Thickness range 0.4–20 mm; proof stress and tensile strength requirements given by thickness bands (notably Rm 520–670 MPa for most thicknesses and Rm ≤ 650 MPa for the thickest band).
- Mechanical and inspection requirements: Minimum elongation (A % ≥ 45), maximum hardness (HV ≤ 205), proof stress values by thickness band, direction of test piece (T), and ambient test temperature. Visual (VT) and ultrasonic (UT) inspections and inclusion content categories are referenced to EN 4700-001 and EN 2951.
- Special notes: For certain high‑power welding applications, reduced S and P limits, Cr/Ni ratio requirements (Suutala formula) and combined impurity limits may be agreed between manufacturer and purchaser.
Applications
- Aerospace structural components where the specified tensile strength, form (plates, sheets, strips) and softened delivery condition are required.
- Manufacturing and procurement of air‑melted stainless steel semi‑finished products for aerospace supply chains, supporting material traceability and consistent mechanical performance.
- Engineering qualification programs: product qualification and sampling are to be agreed between manufacturer and purchaser per EN 4700-001.
Related Standards
- EN 4700-001 - Aerospace series: technical specification for plate, sheet and strip (referenced for test pieces, sampling, inspection and delivery conditions).
- EN 2951 - Micrographic determination of non‑metallic inclusions (inclusion classification requirements).
- EN 4258 and EN 4500-005 - series organization and drafting rules for aerospace metallic material standards (context for EN 2467:2024).
For procurement, design and certification teams, EN 2467:2024 provides the confirmed material designation, production route, delivery condition and mechanical targets to ensure interchangeability and predictable performance of X2CrNi18-9 (1.4307) products in aerospace applications.
Frequently Asked Questions
EN 2467:2024 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa". This standard covers: This document specifies the requirements relating to: Steel X2CrNi18-9 (1.4307) Air melted Softened Plates, sheets and strips 0,4 mm ≤ a ≤ 20 mm 520 MPa ≤ Rm ≤ 670 MPa for aerospace applications. W. nr: 1.4307. ASD-STAN designation: FE-PA3901.
This document specifies the requirements relating to: Steel X2CrNi18-9 (1.4307) Air melted Softened Plates, sheets and strips 0,4 mm ≤ a ≤ 20 mm 520 MPa ≤ Rm ≤ 670 MPa for aerospace applications. W. nr: 1.4307. ASD-STAN designation: FE-PA3901.
EN 2467:2024 is classified under the following ICS (International Classification for Standards) categories: 49.025.10 - Steels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2467:2024 has the following relationships with other standards: It is inter standard links to EN 2467:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 2467:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Taljeno na zraku - Mehčano - Plošče,
pločevina in trakovi - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets
and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Lufterschmolzen - Weichgeglüht -
Platten, Bänder und Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Élaboré à l'air - Adouci - Plaques, tôles
et bandes - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Ta slovenski standard je istoveten z: EN 2467:2024
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 2467
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2024
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2467:2007
English Version
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted -
Softened - Plates, sheets and strips - 0,4 mm a 20 mm -
520 MPa Rm 670 MPa
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) -
Élaboré à l'air - Adouci - Plaques, tôles et bandes - 0,4 Lufterschmolzen - Weichgeglüht - Platten, Bleche und
mm a 20 mm - 520 MPa Rm 670 MPa Bänder - 0,4 mm a 20 mm - 520 MPa Rm 670
MPa
This European Standard was approved by CEN on 19 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2467:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (EN 2467:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by February 2025, and conflicting national standards shall be
withdrawn at the latest by February 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2467:2007.
The main changes with respect to the previous edition are as
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...