Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components

This document specifies requirements and test methods for condensed aerosol extinguishing system components.
This document covers the use of condensed aerosol extinguishing systems for total flooding applications.
This document in not applicable to explosion suppression applications.
This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability for this document by their national responsible authorities.

Ortsfeste Brandbekämpfungsanlagen - Löschanlagen für konzentrierte Aerosole - Teil 1: Anforderungen und Prüfverfahren für Bauteile

Dieses Dokument legt Anforderungen und Prüfverfahren für Bauteile von Löschanlagen mit konzentrierten Aerosolen fest.
Dieses Dokument behandelt den Einsatz von Löschanlagen für konzentrierte Aerosole als Raumschutz-anlagen.
Dieses Dokument gilt nicht für Anwendungen zur Explosionsunterdrückung.
Dieses Dokument deckt nicht alle gesetzlichen Anforderungen ab. In bestimmten Ländern gelten besondere nationale Vorschriften, die gegenüber diesem Dokument Vorrang haben. Den Anwendern dieses Dokuments wird geraten, sich über die Anwendbarkeit oder Nichtanwendbarkeit dieses Dokumentes bei ihren nationalen zuständigen Behörden kundig zu machen.

Installations fixes de lutte contre l’incendie - Systèmes d’extinction à aérosol - Partie 1 : Exigences et méthodes d’essais pour les éléments constitutifs

Le présent document spécifie les exigences et les méthodes d’essai relatives aux composants des systèmes d’extinction à aérosol condensé.
Le présent document couvre également l’utilisation des systèmes d’extinction à aérosol condensé pour des applications de noyage total.
Le présent document n’est pas applicable aux applications de suppression d’explosion.
Le présent document ne traite pas des exigences légales. Dans certains pays, des règlementations nationales spécifiques s’appliquent et prennent le pas sur le présent document. Il est conseillé aux utilisateurs du présent document de s’informer auprès des autorités nationales responsables de l’applicabilité ou de la non-applicabilité du présent document.

Vgrajeni gasilni sistemi - Sistemi za gašenje s kondenziranim aerosolom - 1. del: Zahteve in preskusne metode za sestavne dele

Ta evropski standard določa zahteve in preskusne metode za sestavne dele sistemov za gašenje s kondenziranim aerosolom.
V tem standardu niso obravnavane vse zakonodajne zahteve. V določenih državah veljajo posebni nacionalni predpisi, ki imajo prednost pred tem evropskim standardom. Uporabnikom tega evropskega standarda se svetuje, da se pri svojih nacionalnih odgovornih organih seznanijo z uporabnostjo oziroma neuporabnostjo tega evropskega standarda.

General Information

Status
Published
Publication Date
02-Apr-2019
Withdrawal Date
30-Oct-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Apr-2019
Due Date
05-May-2019
Completion Date
03-Apr-2019

Relations

Buy Standard

Standard
EN 15276-1:2019
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST-TP CEN/TR 15276-1:2009
Vgrajeni gasilni sistemi - Sistemi za gašenje s kondenziranim aerosolom - 1. del:
Zahteve in preskusne metode za sestavne dele
Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1:
Requirements and test methods for components
Ortsfeste Brandbekämpfungsanlagen - Löschanlagen für kondensierte Aerosole - Teil 1:
Anforderungen und Prüfverfahren für Bauteile
Installations fixes de lutte contre l'incendie - Systèmes d'extinction à aérosol - Partie 1:
Exigences et méthodes d'essais pour les éléments constitutifs
Ta slovenski standard je istoveten z: EN 15276-1:2019
ICS:
13.220.10 Gašenje požara Fire-fighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 15276-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 13.220.20
English Version
Fixed firefighting systems - Condensed aerosol
extinguishing systems - Part 1: Requirements and test
methods for components
Installations fixes de lutte contre l'incendie - Systèmes Ortsfeste Brandbekämpfungsanlagen - Löschanlagen
d'extinction à aérosol - Partie 1 : Exigences et für konzentrierte Aerosole - Teil 1: Anforderungen und
méthodes d'essais pour les éléments constitutifs Prüfverfahren für Bauteile
This European Standard was approved by CEN on 6 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15276-1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Component requirements . 8
4.1 Condensed aerosol generator . 8
4.2 Solid aerosol forming compound . 9
4.3 Cooling mechanism . 9
4.4 Activation device . 9
4.4.1 General . 9
4.4.2 Electrical activation device . 9
4.4.3 Thermal activation device . 9
4.4.4 Other methods of activation device . 9
4.5 End plate and housing . 9
4.6 Extinguishants . 9
5 Condensed aerosol generators requirements . 9
5.1 General . 9
5.2 Extinguishing density . 10
5.3 Agent distribution . 10
5.4 Discharge time . 10
5.5 Ambient temperature and humidity operation ranges . 10
5.6 Service life . 10
5.7 Shelf life and storage conditions. 10
5.8 Corrosion . 10
5.9 Vibration . 10
5.10 Mechanical Shock . 10
5.11 Discharge temperature . 11
5.11.1 General . 11
5.11.2 Casing temperature . 11
5.11.3 Aerosol flow temperature . 11
5.12 Activation device . 11
5.12.1 General . 11
5.12.2 Electrical activation device . 11
5.12.3 Thermal activation device . 11
5.13 Function reliability . 11
5.14 Open fire conditions . 11
5.15 Accessories . 11
5.16 Documentation . 12
6 Marking . 12
7 Test methods . 13
7.1 Conditions . 13
7.2 Samples . 13
7.3 Compliance . 14
7.4 Extinguishing density determination . 14
7.5 Coverage determination . 14
7.6 Temperature and humidity operation range tests . 14
7.6.1 General . 14
7.6.2 Test procedure . 14
7.6.3 Low temperature Test. 15
7.7 Accelerated ageing test . 15
7.7.1 General . 15
7.7.2 Objective of test . 15
7.7.3 Performance requirements . 15
7.7.4 Test . 15
7.7.5 Remark . 15
7.7.6 Number of product under test . 15
7.7.7 Remark . 15
7.8 Corrosion test . 16
7.9 Stress corrosion test . 16
7.10 Vibration test. 16
7.11 Drop test . 17
7.11.1 Impact Surface . 17
7.11.2 Procedure . 17
7.11.3 Requirements . 17
7.12 Aerosol flow temperature test . 17
7.13 Activation performance test . 17
7.14 Function test . 18
7.14.1 Discharge time . 18
7.14.2 Aerosol flow temperatures . 18
7.14.3 Test procedure . 18
7.14.4 Casing temperature test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.