Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures - 65 °C to 105 °C and - 65 °C to 150 °C - Product standard

This document defines the required characteristics of cable ties with either internal or external serrations manufactured entirely from plastics material, for installation under controlled tension on aircraft cable harnesses.
It shall be used together with EN 4056-001.

Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003: Kabelbinder aus Kunststoff - Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm

Dieses Dokument legt die Anforderungen an Kabelbinder mit entweder Innen- oder Außenverzahnung fest, die zur Installation mit geregelter Zugkraft an Leitungsbündeln in Flugzeugen verwendet werden und voll-ständig aus Kunststoff hergestellt sind.
Es ist in Verbindung mit EN 4056-001 anzuwenden.

Série aérospatiale - Frettes de câblage pour harnais - Partie 003 : Frettes en plastique - Températures d’utilisation - 65 °C à 105 °C et - 65 °C à 150 °C - Norme de produit

Le présent document définit les caractéristiques des frettes de câblage avec crans internes ou externes fabriqués entièrement à partir de matériaux plastiques, pour installation sous tension contrôlée sur les harnais de câbles dans les aéronefs.
Il doit être utilisé conjointement avec l’EN 4056-001.

Aeronavtika - Kabelske spojke za vezalno pasovje - 003. del: Plastične vezice - Delovne temperature med –65 °C do 105 °C in –65 °C do 150 °C - Standard za proizvod

Ta dokument določa zahtevane lastnosti kabelskih spojk z notranjo ali zunanjo nazobčanostjo, v celoti proizvedenih iz plastike, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje. Uporabljati ga je treba skupaj s standardom EN 4056-001.

General Information

Status
Published
Publication Date
03-Sep-2019
Withdrawal Date
30-Mar-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Sep-2019
Completion Date
04-Sep-2019

Relations

Buy Standard

Standard
EN 4056-003:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 4056-003:2016
Aeronavtika - Kabelske spojke za vezalno pasovje - 003. del: Plastične vezice -
Delovne temperature med –65 °C do 105 °C in –65 °C do 150 °C - Standard za
proizvod
Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003: Kabelbinder aus
Kunststoff - Betriebstemperatur -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 003 : Frettes en plastique -
Températures d’utilisation –65 °C à 105 °C et –65 °C à 150 °C - Norme de produit
Ta slovenski standard je istoveten z: EN 4056-003:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4056-003
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4056-003:2016
English Version
Aerospace series - Cable ties for harnesses - Part 003:
Plastic cable ties - Operating temperatures - 65 °C to 105
°C and - 65 °C to 150 °C - Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 003 : Frettes en plastique - Températures Leitungsbündel - Teil 003: Kabelbinder aus Kunststoff -
d'utilisation - 65 °C à 105 °C et - 65 °C à 150 °C - Betriebstemperatur - 65 °C bis 105 °C und - 65 °C bis
Norme de produit 150 °C - Produktnorm
This European Standard was approved by CEN on 5 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-003:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Tests and requirements . 7
6 Quality assurance . 8
7 Designation . 8
8 Marking . 8
9 Packaging and storage . 8

European foreword
This document (EN 4056-003:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall be
withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 4056-003:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document defines the required characteristics of cable ties with either internal or external serrations
manufactured entirely from plastics material, for installation under controlled tension on aircraft cable
harnesses.
It shall be used together with EN 4056-001.
2 Normati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.