EN 1665:1997/AC:1998
(Corrigendum)Hexagon bolts with flange - Heavy series
- BACK
- 18-Mar-1998
- 27-Feb-2007
- 21.060.10
- CEN/TC 185
Hexagon bolts with flange - Heavy series
TC - Figures 1 and 2 and Annex A (E/F/D)
Sechskantschrauben mit Flansch - Schwere Reihe
Vis à tête hexagonale à embase cylindro-tronconique - Série large
Vijaki s šestrobo glavo s poševnim krajcem - Težka izvedba - Dopolnilo AC
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vijaki s šestrobo glavo s poševnim krajcem - Težka izvedba - Dopolnilo ACSechskantschrauben mit Flansch - Schwere ReiheVis a tete hexagonale a embase cylindro-tronconique - Série largeHexagon bolts with flange - Heavy series21.060.10Sorniki, vijak
...
This May Also Interest You
This document specifies the mechanical and physical properties of set screws and similar fasteners not under tensile stress, made of corrosion resistant austenitic and duplex stainless steels, with specified grades and hardness classes.
ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties (detailed properties of stainless steel grades, corrosion behaviour with regards to pitting, crevice and intergranular corrosion, magnetic properties, etc.).
WARNING — Set screws conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in application ranging from –20 °C to +150 °C. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on service environment conditions of the assembly (see also Clauses 5 and 6).
This document applies to set screws and similar fasteners not under tensile stress
— with ISO metric thread in accordance with ISO 68-1,
— with diameter/pitch combinations in accordance with ISO 261 and ISO 262,
— with nominal thread diameter 1,6 mm to 24 mm,
— with thread tolerances in accordance with ISO 965-1 and ISO 965-2,
— with specified hardness classes, and
— of any shape.
NOTE The term set screw is used in the following for all screws and similar fasteners not under tensile stress within the scope of this document.
This document does not apply to screws under tensile stress (see ISO 3506-1). It does not specify requirements for functional properties such as shear strength or weldability.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jan-2025
- 21.060.10
- CEN/TC 185
This document specifies the mechanical and physical properties of tapping screws made of corrosion resistant austenitic, martensitic, ferritic and duplex stainless steels, with specified grades and hardness classes.
ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties (detailed properties of stainless steel grades, corrosion behaviour with regards to pitting, crevice and intergranular corrosion, magnetic properties, etc.).
WARNING — Tapping screws conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –20 °C to +150 °C. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on service environment conditions of the assembly (see also Clauses 5 and 6).
This document applies to tapping screws with threads ST2,2 to ST8, in accordance with ISO 1478.
This document does not apply to tapping screws with special properties, such as weldability.
- Standard22 pagesEnglish languagesale 10% offe-Library read for×1 day
- 21-Jan-2025
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of slotted set screws with cup point, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5, or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Jun-2024
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of slotted set screws with long dog point for regular standard lengths and with short dog point for short standard lengths, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Jun-2024
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of slotted set screws with flat point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Jun-2024
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of slotted set screws with cone point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
- Standard14 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Jun-2024
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 10-Jan-2023
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of hexalobular socket countersunk flat head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M10, and with product grade A.
If in certain cases other specifications are requested, stainless steel grades can be selected from ISO 3506‑1, and dimensional options from ISO 888 or ISO 4753.
NOTE 1 The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 3.
NOTE 2 Hexalobular socket countersunk head screws (high head), with full loadability are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
NOTE 3 Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
- 10-Jan-2023
- 21.060.10
- CEN/TC 185
This document specifies the characteristics of hexagon socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If, in certain cases, other specifications are requested, stainless steel grades can be selected from ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 10-Jan-2023
- 21.060.10
- CEN/TC 185
This document specifies the mechanical and physical properties of heat treated tapping screws made of steel, with thread sizes ST2,2 to ST9,5 in accordance with ISO 1478, when tested at the ambient temperature range of 10 °C to 35 °C, and the related test methods.
Tapping screws are designed to form mating threads in sheet metals, without their own threads being deformed. Tapping screws are not intended to be pretensioned by design, even though they can experience varying degrees of low-level tensile stress after installation.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Dec-2022
- 21.060.10
- CEN/TC 185
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...