iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 3991

(Main)

Agricultural machinery - Robotic feed systems - Safety (ISO/DIS 3991:2023)

Agricultural machinery - Robotic feed systems - Safety (ISO/DIS 3991:2023)

This document specifies the safety requirements and their verification for the design and construction of robotic feed systems distributing feed and performing at least one of the following functions without the need of human intervention:
- storing of feed
- loading of mobile feed unit (MFU)
- mixing
- travelling
- cleaning (residual feed)
- pushing feed
In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document does not apply to systems designed to be used at a fixed location and are not meant to be moved from one place to another to discharge feed (e.g. chain conveyor feed systems, belt conveyor feed systems or liquid feed systems).

Landmaschinen - Roboter-Fütterungssysteme - Sicherheit (ISO/DIS 3991:2023)

Matériel agricole - Systèmes d'alimentation robotisés - Sécurité (ISO/DIS 3991:2023)

Kmetijski stroji - Robotski sistemi za krmljenje - Varnost (ISO/DIS 3991:2023)

General Information

Status
Not Published
Publication Date
14-Jul-2024
ICS
65.060.99 - Other agricultural machines and equipment
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 3 - Mobile machines and trailers
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
13-Nov-2023
Completion Date
13-Nov-2023
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
oSIST prEN ISO 3991:2023 - Agricultural machinery - Robotic feed systems - Safety (ISO/DIS 3991:2023)

Buy Standard

prEN ISO 3991:2023 - BARVEprEN ISO 3991:2023 - BARVE
PreviousNext
Draft
prEN ISO 3991:2023 - BARVE
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 3991:2023
01-marec-2023
Kmetijski stroji - Robotski sistemi za krmljenje - Varnost (ISO/DIS 3991:2023)
Agricultural machinery - Robotic feed systems - Safety (ISO/DIS 3991:2023)
Landmaschinen - Roboter-Fütterungssysteme - Sicherheit (ISO/DIS 3991:2023)
Matériel agricole - Systèmes d'alimentation robotisés - Sécurité (ISO/DIS 3991:2023)
Ta slovenski standard je istoveten z: prEN ISO 3991
ICS:
65.060.99 Drugi kmetijski stroji in Other agricultural machines
oprema and equipment
oSIST prEN ISO 3991:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3991:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 3991:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3991
ISO/TC 23/SC 3 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-01-03 2023-03-28
Agricultural machinery — Robotic feed systems — Safety
ICS: 65.060.99
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3991:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 3991:2023
ISO/DIS 3991:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3991
ISO/TC 23/SC 3 Secretariat: DIN
Voting begins on: Voting terminates on:

Agricultural machinery — Robotic feed systems — Safety
ICS: 65.060.99
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 3991:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 3991:2023
ISO/DIS 3991:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Safety requirements and / or protective measures .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16952:2018+A1:2021(Main)
Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety
SIST EN 16952:2018+A1:2021

1.1   This European Standard, when used together with EN ISO 4254 1 and EN 15811, specifies safety requirements and measures for self-propelled rough-terrain work platforms for orchard’s operations (WPO) operating at a maximum of 3 m high as defined in 3.1, where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations related to orchard from the work platform.
NOTE   For examples of rough-terrain work platforms for orchard’s operations (WPO), see Figures E. 1 to E.3.
This European Standard describes methods for the elimination or reduction of hazards arising from the intended use of these machines in the course of normal operation and service, except hazards related to conveyor belts and elevators for the bin. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254 1, the requirements of this document take precedence over the requirements of EN ISO 4254 1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254 1 and EN 15811, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to WPOs, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   getting on and off the work platform at changing levels;
c)   environmental aspects;
d)   road safety.
1.2   This European Standard does not apply to:
a)   Mobile Elevating Work Platforms (MEWPs) (see EN 280);
NOTE 1   Figure E.4 gives an example of this type of machine.
b)   boom-type MEWPs (see EN 280);
NOTE 2   Figure E.5 and E.6 give examples of this type of machine.
c)   tail lifts (see EN 1756-1 and EN 1756-2);
d)   mast climbing work platforms (see EN 1495);
e)   lifting tables (see EN 1570-1);
f)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
g)   elevating operator positions on industrial trucks (see EN 1726-2);
h)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
i)    machines having centre of the area of the platform outside the tipping lines.
NOTE 3   Figure E.7 gives an example of this type of machine.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 703:2021(Main)
Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines
SIST EN 703:2021

This document, used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs or materials used for animal bedding such as straw, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document applies only to machines that have the following functional combinations:
-   mixing and distributing functions;
-   mixing, chopping and distributing functions;
-   loading, mixing and distributing functions;
-   loading, mixing, chopping and distributing functions;
-   chopping and distributing functions; or
-   loading, chopping and distributing functions.
Silage block cutters, even if they carry out a single function, are covered by this document.
This document does not apply to:
-   machines which pick up green fodder directly from the field;
-   loading cranes;
-   silage buckets;
-   round or rectangular unbalers.
NOTE 1   Loading cranes are dealt with in EN 12999:2011+A2:2018.
NOTE 2   Autonomous silage loading, mixing and/or chopping and distributing machines (robotic feed systems) will be dealt with in a separate standard (under preparation).
This document deals with the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in Clause 4, except for the hazards arising from:
-   failure of the control circuit;
-   inadequate seating;
-   inadequate lighting;
-   travelling of machinery;
-   break-up of parts rotating at high speed;
-   cutting hazard during service on sharp parts (e.g. blades of the mixing and/or chopping device).
It is not applicable to environmental hazards (except noise).
It does not deal with stability when travelling.
This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 4254-19(Main)
Agricultural machinery - Safety - Part 19: Feed mixing machines (ISO/DIS 4254-19:2023)
oSIST prEN ISO 4254-19:2023

This document, used together with ISO 4254-1, specifies the safety requirements and their verification
for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing
silage and/or other feedstuffs or materials used for animal bedding such as straw, to be used by one
operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of
information on safe working practices to be provided by the manufacturer.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16952:2018/FprA1(Amendment)
Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety
SIST EN 16952:2018/kFprA1:2021

1.1   This European Standard, when used together with EN ISO 4254 1 and EN 15811, specifies safety requirements and measures for self-propelled rough-terrain work platforms for orchard’s operations (WPO) operating at a maximum of 3 m high as defined in 3.1, where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations related to orchard from the work platform.
NOTE   For examples of rough-terrain work platforms for orchard’s operations (WPO), see Figures E. 1 to E.3.
This European Standard describes methods for the elimination or reduction of hazards arising from the intended use of these machines in the course of normal operation and service, except hazards related to conveyor belts and elevators for the bin. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254 1, the requirements of this document take precedence over the requirements of EN ISO 4254 1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254 1 and EN 15811, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to WPOs, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   getting on and off the work platform at changing levels;
c)   environmental aspects;
d)   road safety.
1.2   This European Standard does not apply to:
a)   Mobile Elevating Work Platforms (MEWPs) (see EN 280);
NOTE 1   Figure E.4 gives an example of this type of machine.
b)   boom-type MEWPs (see EN 280);
NOTE 2   Figure E.5 and E.6 give examples of this type of machine.
c)   tail lifts (see EN 1756-1 and EN 1756-2);
d)   mast climbing work platforms (see EN 1495);
e)   lifting tables (see EN 1570-1);
f)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
g)   elevating operator positions on industrial trucks (see EN 1726-2);
h)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
i)    machines having centre of the area of the platform outside the tipping lines.
NOTE 3   Figure E.7 gives an example of this type of machine.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16952:2018+A1:2021(Main)
Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety
SIST EN 16952:2018+A1:2021

1.1   This European Standard, when used together with EN ISO 4254 1 and EN 15811, specifies safety requirements and measures for self-propelled rough-terrain work platforms for orchard’s operations (WPO) operating at a maximum of 3 m high as defined in 3.1, where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations related to orchard from the work platform.
NOTE   For examples of rough-terrain work platforms for orchard’s operations (WPO), see Figures E. 1 to E.3.
This European Standard describes methods for the elimination or reduction of hazards arising from the intended use of these machines in the course of normal operation and service, except hazards related to conveyor belts and elevators for the bin. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254 1, the requirements of this document take precedence over the requirements of EN ISO 4254 1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254 1 and EN 15811, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to WPOs, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   getting on and off the work platform at changing levels;
c)   environmental aspects;
d)   road safety.
1.2   This European Standard does not apply to:
a)   Mobile Elevating Work Platforms (MEWPs) (see EN 280);
NOTE 1   Figure E.4 gives an example of this type of machine.
b)   boom-type MEWPs (see EN 280);
NOTE 2   Figure E.5 and E.6 give examples of this type of machine.
c)   tail lifts (see EN 1756-1 and EN 1756-2);
d)   mast climbing work platforms (see EN 1495);
e)   lifting tables (see EN 1570-1);
f)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
g)   elevating operator positions on industrial trucks (see EN 1726-2);
h)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
i)    machines having centre of the area of the platform outside the tipping lines.
NOTE 3   Figure E.7 gives an example of this type of machine.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 703:2021(Main)
Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines
SIST EN 703:2021

This document, used together with EN ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs or materials used for animal bedding such as straw, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This document applies only to machines that have the following functional combinations:
-   mixing and distributing functions;
-   mixing, chopping and distributing functions;
-   loading, mixing and distributing functions;
-   loading, mixing, chopping and distributing functions;
-   chopping and distributing functions; or
-   loading, chopping and distributing functions.
Silage block cutters, even if they carry out a single function, are covered by this document.
This document does not apply to:
-   machines which pick up green fodder directly from the field;
-   loading cranes;
-   silage buckets;
-   round or rectangular unbalers.
NOTE 1   Loading cranes are dealt with in EN 12999:2011+A2:2018.
NOTE 2   Autonomous silage loading, mixing and/or chopping and distributing machines (robotic feed systems) will be dealt with in a separate standard (under preparation).
This document deals with the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in Clause 4, except for the hazards arising from:
-   failure of the control circuit;
-   inadequate seating;
-   inadequate lighting;
-   travelling of machinery;
-   break-up of parts rotating at high speed;
-   cutting hazard during service on sharp parts (e.g. blades of the mixing and/or chopping device).
It is not applicable to environmental hazards (except noise).
It does not deal with stability when travelling.
This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 4254-19(Main)
Agricultural machinery - Safety - Part 19: Feed mixing machines (ISO/DIS 4254-19:2023)
oSIST prEN ISO 4254-19:2023

This document, used together with ISO 4254-1, specifies the safety requirements and their verification
for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing
silage and/or other feedstuffs or materials used for animal bedding such as straw, to be used by one
operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of
information on safe working practices to be provided by the manufacturer.

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16952:2018/FprA1(Amendment)
Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety
SIST EN 16952:2018/kFprA1:2021

1.1   This European Standard, when used together with EN ISO 4254 1 and EN 15811, specifies safety requirements and measures for self-propelled rough-terrain work platforms for orchard’s operations (WPO) operating at a maximum of 3 m high as defined in 3.1, where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations related to orchard from the work platform.
NOTE   For examples of rough-terrain work platforms for orchard’s operations (WPO), see Figures E. 1 to E.3.
This European Standard describes methods for the elimination or reduction of hazards arising from the intended use of these machines in the course of normal operation and service, except hazards related to conveyor belts and elevators for the bin. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254 1, the requirements of this document take precedence over the requirements of EN ISO 4254 1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254 1 and EN 15811, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to WPOs, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   getting on and off the work platform at changing levels;
c)   environmental aspects;
d)   road safety.
1.2   This European Standard does not apply to:
a)   Mobile Elevating Work Platforms (MEWPs) (see EN 280);
NOTE 1   Figure E.4 gives an example of this type of machine.
b)   boom-type MEWPs (see EN 280);
NOTE 2   Figure E.5 and E.6 give examples of this type of machine.
c)   tail lifts (see EN 1756-1 and EN 1756-2);
d)   mast climbing work platforms (see EN 1495);
e)   lifting tables (see EN 1570-1);
f)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
g)   elevating operator positions on industrial trucks (see EN 1726-2);
h)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
i)    machines having centre of the area of the platform outside the tipping lines.
NOTE 3   Figure E.7 gives an example of this type of machine.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day