EN 4800-005:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRYDQMHLuft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische Lieferbedingungen - Teil 005: SchmiedevormaterialSérie aérospatiale - Titane et alliages de titane - Spécification technique — Partie 005: Produits destinés à la forgeAerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 4800-005:2010SIST EN 4800-005:2012en01-januar-2012SIST EN 4800-005:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4800-005
November 2010 ICS 49.025.30 English Version
Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005: Produits destinés à la forge
Luft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische Lieferbedingungen - Teil 005: Schmiedevormaterial This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4800-005:2010: ESIST EN 4800-005:2012

EN 2002-002, Aerospace series — Metallic materials — Test methods — Part 002: Tensile testing at elevated temperature EN 2002-005, Aerospace series — Test methods for metallic materials — Part 005: Uninterrupted creep and stress-rupture testing EN 2003-009, Aerospace series — Test methods — Titanium and titanium alloys — Part 009: Determination of surface contamination EN 2032-1, Aerospace series — Metallic materials — Part 1: Conventional designation EN 2032-2, Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery condition EN 2078, Aerospace series — Metallic materials — Manufacturing schedule, inspection schedule, inspection and test report — Definition, general principles, preparation and approval EN 2954-002, Aerospace series — Macrostructure of titanium and titanium alloy wrought products — Part 002: Macrostructure of bar, section, forging stock and forgings EN 2955, Aerospace series — Recycling of titanium and titanium alloy scrap EN 2957, Aerospace series — Method of preparation of forged samples EN 3114-001, Aerospace series — Test method — Microstructure of (. + ) titanium alloy wrought products — Part 001: General requirements EN 3114-002, Aerospace series — Test method — Microstructure of (. + ) titanium alloy wrought products — Part 002: Microstructure of bars, sections, forging stock and forgings EN 3683, Aerospace series — Test methods — Titanium alloy wrought products — Determination of primary α content — Point count method and line intercept method EN 3684, Aerospace series — Test methods — Titanium alloy wrought products — Determination of
transus temperature — Metallographic method EN 3873, Aerospace series — Test methods for metallic materials — Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces SIST EN 4800-005:2012

(ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) EN ISO 12737, Metallic materials — Determination of plane-strain fracture toughness (ISO 12737:2005) TR 2410, Aerospace series — Metallic materials — Relationship between dimensional standards and material standards 2) AMS 2750, Pyrometry 3)
3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4259 apply.
1) Published as ASD-STAN Prestandard at the date of publication of this standard. 2) Published as ASD-STAN Technical Report at the date of publication of this standard. 3) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA. SIST EN 4800-005:2012
...