iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CR 13504:2000

(Main)

Packaging - Material recovery - Criteria for a minimum content of recycled material

Packaging - Material recovery - Criteria for a minimum content of recycled material

This Report addresses the criteria for a minimum content of recycled material in packaging for appropriate types of packaging, and deals with the criteria that will influence the acceptable level of recycled material and the methodology by which such content can be monitored.

Emballages - Valorisation matières - Critères pour une teneur minimale en matériaux recyclés

Embalaža - Snovna izraba - Merila za najmanjšo količino recikliranega materiala

General Information

Status
Published
Publication Date
18-Apr-2000
ICS
13.030.50 - Recycling
55.020 - Packaging and distribution of goods in general
Technical Committee
CEN/TC 261 - Packaging
Drafting Committee
CEN/TC 261/SC 4/WG 3 - Material recovery
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Apr-2000
Completion Date
19-Apr-2000
Directive
94/62/EC - European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste
Mandate
M/200 - Mandate to CEN for standardization and a study related to packaging and packaging waste
Ref Project
SIST CR 13504:2001 - Packaging - Material recovery - Criteria for a minimum content of recycled material

Buy Standard

CR 13504:2001CR 13504:2001
PreviousNext
Technical report
CR 13504:2001
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST CR 13504:2001
01-februar-2001
(PEDODåD6QRYQDL]UDED0HULOD]DQDMPDQMãRNROLþLQRUHFLNOLUDQHJDPDWHULDOD
Packaging - Material recovery - Criteria for a minimum content of recycled material
Emballages - Valorisation matieres - Criteres pour une teneur minimale en matériaux
recyclés
Ta slovenski standard je istoveten z: CR 13504:2000
ICS:
13.030.50 Recikliranje Recycling
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
SIST CR 13504:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST CR 13504:2001

---------------------- Page: 2 ----------------------

SIST CR 13504:2001

---------------------- Page: 3 ----------------------

SIST CR 13504:2001

---------------------- Page: 4 ----------------------

SIST CR 13504:2001

---------------------- Page: 5 ----------------------

SIST CR 13504:2001

---------------------- Page: 6 ----------------------

SIST CR 13504:2001

---------------------- Page: 7 --
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 13688:2008(Main)
Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
SIST-TP CEN/TR 13688:2008

This Report provides some examples of substances and materials that may cause a sustained impediment in the recycling activities, and is intended to assist in the assessment requirements set out in the standard EN 13430.
It describes substances or materials which cause problems or inhibit the recycling process, or which have a negative influence on the quality of recycled material, and for which it is considered that technological solutions will not be developed in the near future.
These examples are however qualified by the fact that the recycling operations can vary from region to region and state to state, that technology is constantly changing, and that the use to which the recycled material is put will also determine whether such substances and materials are a problem.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13430:2004(Main)
Packaging - Requirements for packaging recoverable by material recycling
SIST EN 13430:2004

This standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13429:2004(Main)
Packaging - Reuse
SIST EN 13429:2004

This European Standard specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 13688:2008(Main)
Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
SIST-TP CEN/TR 13688:2008

This Report provides some examples of substances and materials that may cause a sustained impediment in the recycling activities, and is intended to assist in the assessment requirements set out in the standard EN 13430.
It describes substances or materials which cause problems or inhibit the recycling process, or which have a negative influence on the quality of recycled material, and for which it is considered that technological solutions will not be developed in the near future.
These examples are however qualified by the fact that the recycling operations can vary from region to region and state to state, that technology is constantly changing, and that the use to which the recycled material is put will also determine whether such substances and materials are a problem.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13430:2004(Main)
Packaging - Requirements for packaging recoverable by material recycling
SIST EN 13430:2004

This standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13429:2004(Main)
Packaging - Reuse
SIST EN 13429:2004

This European Standard specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems.
This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
kSIST FprEN 12662-1:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME). The working range is from 12 mg/kg to 26 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [4].
This document in general is applicable to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C.
This test method can be used for paraffinic diesel fuels as specified in EN 15940, for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2024(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
kSIST FprEN ISO 17830:2024

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day