EN ISO 15175:2018

SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST EN ISO 15175:2011
SIST ISO 15175:2006
Kakovost tal - Karakterizacija onesnaženih tal v zvezi z varovanjem podzemne
vode (ISO 15175:2018)
Soil quality - Characterization of contaminated soil related to groundwater protection
(ISO 15175:2018)
Bodenbeschaffenheit - Ermittlung von Kennwerten des Bodens hinsichtlich des
Wirkungspfads Boden (ISO 15175:2018)
Qualité du sol - Caractérisation des sols contaminés en relation avec la nappe
phréatique (ISO 15175:2018)
Ta slovenski standard je istoveten z: EN ISO 15175:2018
ICS:
13.080.40 Hidrološke lastnosti tal Hydrological properties of
soils
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15175
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 13.080.40 Supersedes EN ISO 15175:2011
English Version
Soil quality - Characterization of contaminated soil related
to groundwater protection (ISO 15175:2018)
Qualité du sol - Caractérisation des sols pollués en Bodenbeschaffenheit - Ermittlung von Kennwerten des
relation avec la protection des eaux souterraines (ISO Bodens hinsichtlich des Wirkungspfads Boden (ISO
15175:2018) 15175:2018)
This European Standard was approved by CEN on 3 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15175:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15175:2018) has been prepared by Technical Committee ISO/TC 190 "Soil
quality" in collaboration with Technical Committee CEN/TC 345 “Characterization of soils” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15175:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15175:2018 has been approved by CEN as EN ISO 15175:2018 without any modification.

INTERNATIONAL ISO
STANDARD 15175
Second edition
2018-12
Soil quality — Characterization
of contaminated soil related to
groundwater protection
Qualité du sol — Caractérisation des sols pollués en relation avec la
protection des eaux souterraines
Reference number
ISO 15175:2018(E)
©
ISO 2018
ISO 15175:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 15175:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 3
5 Assessment of direct and indirect inputs to groundwater. 5
5.1 General . 5
5.2 Relevant soil processes . 6
5.3 Impact assessment procedures . 7
5.4 Sensitivity and uncertainty analysis, data handling and quality . 9
6 Tier 1 — Simple assessment .11
6.1 General .11
6.2 Site and soil description .11
6.3 Simple assessment of the potential leaching risk .12
7 Tier 2 — Intermediate assessment .13
7.1 General .13
7.2 Sampling .13
7.3 Characterization of soil, water and soil gas .13
7.3.1 General.13
7.3.2 Physical parameters .14
7.3.3 Chemical parameters .14
7.4 Impact assessment .16
7.4.1 General.16
7.4.2 Substance concentration in soil water .16
7.4.3 Amount of transferable substances .17
7.4.4 Degradation of organic contaminants .18
8 Tier 3 — Complex assessment .18
8.1 General .18
8.2 Biological parameters .18
8.3 Isotopic parameters .18
8.4 Geophysical parameters .19
Annex A (informative) Relevant parameters suggested for the physical, chemical and
biological characterization of soil, water and soil gas .20
Annex B (informative) Examples of complex methods for assessing the leaching risk .27
Bibliography .36
ISO 15175:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 7,
Impact assessment.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
This second edition cancels and replaces th
...