iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1313-1:1997/A1:1999

(Amendment)

Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber

Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber

This European standard specifies permitted deviations and preferred sizes of European softwood sawn timber at a moisture content of 20%.

Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmaße - Teil 1: Nadelschnittholz

Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1: Bois sciés résineux

Okrogli in žagani les – Dovoljena odstopanja in prednostne mere – 1. del: Žagani les iglavcev

General Information

Status
Withdrawn
Publication Date
22-Jun-1999
Withdrawal Date
26-Jan-2010
ICS
79.040 - Wood, sawlogs and sawn timber
Technical Committee
CEN/TC 175 - Round and sawn timber
Drafting Committee
CEN/TC 175/WG 2 - Sawn timber
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
27-Jan-2010
Completion Date
27-Jan-2010
Ref Project
SIST EN 1313-1:2003/A1:2003 - Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber

Relations

Amends
EN 1313-1:1997 - Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
Effective Date
08-Jun-2022
Replaced By
EN 1313-1:2010 - Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
Effective Date
30-Jan-2010

Buy Standard

EN 1313-1:2003/A1:2003EN 1313-1:2003/A1:2003
PreviousNext
Amendment
EN 1313-1:2003/A1:2003
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1313-1:2003/A1:2003
01-oktober-2003
Okrogli in žagani les – Dovoljena odstopanja in prednostne mere – 1. del: Žagani
les iglavcev
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood
sawn timber
Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmaße - Teil 1:
Nadelschnittholz
Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1:
Bois sciés résineux
Ta slovenski standard je istoveten z: EN 1313-1:1997/A1:1999
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 844:2019(Main)
Round and sawn timber - Terminology
SIST EN 844:2019

This European Standard defines general terms relating to sawn timber and round timber used in European Standards.

  • Standard
    100 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    92 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1309-3:2018(Main)
Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations
SIST EN 1309-3:2018

This European Standard specifies the methodology for measurement of features - in relation to wood structure, biological agencies and other damage - taken into account in the visual grading:
a)   for appearance - of sawn, processed and round timber;
b)   for serviceability - of sawn and processed timber (identified in EN 1611-1 as the integrity of the timber).
When the standard is applied the methodology of measurement used shall be stated.
It is not applicable to structural timber for which strength grading in accordance with EN 14081-1 is required.
This standard applies to hardwood and softwood sawn timber, both square edged and un-edged, to processed timber and to round timber.
It does not apply to tropical timber.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14298:2017(Main)
Sawn timber - Assessment of drying quality
SIST EN 14298:2018

This European Standard defines a method of assessment of drying quality. It applies to a lot of dried sawn timber (surfaced or not). It applies to both softwood and hardwood with a thickness not greater than 100 mm.
The quality of drying is expressed in terms of moisture content: target, average of the lot and variation between the pieces of the lot.
An option for specifying the degree of case-hardening is included.
NOTE 1   Other features related to drying, e.g. check, shake, warp, stain, etc., are specified in documents for visual grading of sawn timber or in product specifications and are not covered by this document.
NOTE 2   In the following the term "sawn timber" is used for all dried timber covered by this scope.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16449:2014(Main)
Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide
SIST EN 16449:2014

This European Standard provides a calculation method to quantify the amount of atmospheric carbon dioxide based on the biogenic carbon content of wood.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1316-2:2012(Main)
Hardwood round timber - Qualitative classification - Part 2: Poplar
SIST EN 1316-2:2013

This European Standard specifies a qualitative classification and grade designations for felled round timber of poplar in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known. This classification is applicable to all merchantable clones of poplar.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1316-1:2012(Main)
Hardwood round timber - Qualitative classification - Part 1: Oak and beech
SIST EN 1316-1:2013

This European Standard specifies a qualitative classification and grade designations for felled round timber of oak and beech presented in the form of long poles or logs.
The classifications describe quality classes of round timbers for which the intended use is not known.
The classification applies for the following species: Oaks, Quercus sessiliflora SALISB. (or Quercus petraea LIEBL.), Quercus robur L. (or Quercus pedunculata EHRH.) and Beech (Fagus sylvatica L).

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 14464:2010(Main)
Sawn timber - Method for assessment of case-hardening
SIST-TS CEN/TS 14464:2010

This Technical Specification defines a destructive method of assessing the case-hardening of a piece of sawn timber with reference to the distortion measured in a slice taken from the piece.
This Technical Specification is applicable to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 975-1:2009/AC:2010(Corrigendum)
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech
SIST EN 975-1:2009/AC:2011

TC - text to be deleted in the teable headers of Tables 3, 4, 6 and 7 - Building and civil engineering

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1313-1:2010(Main)
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
SIST EN 1313-1:2010

This European Standard specifies permitted deviations for thickness and width at reference moisture content and adjustments for changes in size due to changes in moisture content. Preferred sizes for thicknesses of 38 mm and over are also specified.
This standard applies to softwood sawn timber.
An informative annex gives complementary national sizes.
NOTE   A.5 includes for France the concept of preferred size for green timber.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1315:2010(Main)
Dimensional classification of round timber
SIST EN 1315:2010

This European Standard specifies a dimensional classification for round timber (softwood and hardwood) for which the intended use is not known.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day