Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use

This document specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
-   the introduction and/or extraction of water for treatment or leisure purposes;
-   the introduction of air for leisure purposes;
-   water leisure features involving the movement of water.
NOTE   The above items are identified with the general term devices.

Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen in öffentlichen Schwimmbädern

Équipement de piscine - Partie 3 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d'extraction d'eau/d'air, installés dans les piscines destinées à un usage public

Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in preskusne metode za bazenski pribor za pripravo vode, vgrajen v javne bazene - Dopolnilo A1

General Information

Status
Not Published
Publication Date
10-Aug-2025
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
13-Jun-2024
Due Date
17-Jun-2024
Completion Date
13-Jun-2024

Relations

Buy Standard

Draft
EN 13451-3:2022/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2024
Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in
preskusne metode za bazenski pribor za pripravo vode, vgrajen v javne bazene -
Dopolnilo A1
Swimming pool equipment - Part 3: Additional specific safety requirements and test
methods for inlets and outlets and water/air based water leisure features installed in
pools for public use
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische
Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen in
öffentlichen Schwimmbädern
Équipement de piscine - Partie 3 : Exigences de sécurité et méthodes d'essai
complémentaires spécifiques aux pièces d'aspiration et de refoulement et aux
équipements de loisirs aquatiques disposant d'introduction et d'extraction d'eau/d'air,
installés dans les piscines destinées à un usage public
Ta slovenski standard je istoveten z: EN 13451-3:2022/prA1
ICS:
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13451-3:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2024
ICS 97.220.10
English Version
Swimming pool equipment - Part 3: Additional specific
safety requirements and test methods for inlets and
outlets and water/air based water leisure features
installed in pools for public use
Équipement de piscine - Partie 3 : Exigences de Schwimmbadgeräte - Teil 3: Zusätzliche besondere
sécurité et méthodes d'essai complémentaires sicherheitstechnische Anforderungen und
spécifiques aux pièces d'aspiration et de refoulement Prüfverfahren für Ein- und Ausläufe sowie Wasser-
et aux équipements de loisirs aquatiques disposant Luftattraktionen in öffentlichen Schwimmbädern
d'introduction et d'extraction d'eau/d'air, installés dan
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

This draft amendment A1, if approved, will modify the European Standard EN 13451-3:2022. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Icela
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.