EN ISO 20349-1:2017/A1:2020

SLOVENSKI STANDARD
01-januar-2021
Osebna varovalna oprema - Obutev za zaščito pred tveganji v livarnah in pri
varjenju - 1. del: Zahteve in preskusne metode za zaščito pred tveganji v livarnah -
Dopolnilo A1 (ISO 20349-1:2017/Amd 1:2020)
Personal protective equipment - Footwear protecting against risks in foundries and
welding - Part 1: Requirements and test methods for protection against risks in foundries
- Amendment 1 (ISO 20349-1:2017/Amd 1:2020)
Persönliche Schutzausrüstung - Schuhe zum Schutz gegen Risiken in Gießereien und
beim Schweißen - Teil 1: Anforderungen und Prüfverfahren zum Schutz gegen Risiken in
Gießereien - Änderung 1 (ISO 20349-1:2017/Amd 1:2020)
Équipement de protection individuelle - Chaussures de protection contre les risques
dans les fonderies et lors d'opérations de soudage - Partie 1: Exigences et méthode
dessai pour la protection contre les risques dans les fonderies - Amendement 1 (ISO
20349-1:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 20349-1:2017/A1:2020
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20349-1:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2020
EUROPÄISCHE NORM
ICS 13.340.50
English Version
Personal protective equipment - Footwear protecting
against risks in foundries and welding - Part 1:
Requirements and test methods for protection against
risks in foundries - Amendment 1 (ISO 20349-
1:2017/Amd 1:2020)
Équipement de protection individuelle - Chaussures de Persönliche Schutzausrüstung - Schuhe zum Schutz
protection contre les risques dans les fonderies et lors gegen Risiken in Gießereien und beim Schweißen - Teil
d'opérations de soudage - Partie 1: Exigences et 1: Anforderungen und Prüfverfahren zum Schutz gegen
méthode d'essai pour la protection contre les risques Risiken in Gießereien - Änderung 1 (ISO 20349-
dans les fonderies - Amendement 1 (ISO 20349- 1:2017/Amd 1:2020)
1:2017/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 20349-1:2017; it was approved by CEN on 31 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20349-1:2017/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 4

European foreword
This document (EN ISO 20349-1:2017/A1:2020) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
161 “Foot and leg protectors” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 20349-1:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2021, and
conflicting national standards shall be withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20349-1:2017/Amd 1:2020 has been approved by CEN as EN ISO 20349-
1:2017/A1:2020 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered
This European Standard has been prepared under a Commission’s standardization request to provide
one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the
European Parliament and of the Council of 9 March 2016 on personal protective equipment.
Once this standard is cited in the Official Journal of the European Union under that Regulation,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Regulation, and associated EFTA-regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex II of Regulation (EU) 2016/425
Essential Requirements of Clause(s)/sub-clause(s) Remarks/Notes
Regulation (EU) 2016/425 of EN ISO 20349-1:2017
1.1.1 Ergonomics 6, 7.1, 7.2 By reference to EN ISO
20345:2011
1.2.1.1 Innocuousness of PPE 6, 7.9 By reference to EN ISO
20345:2011
1.3.2 Lightness and strength 6, 7.3, 7.4, 7.5, 7.6, 7.7 By reference to EN ISO
20345:2011
1.4 Information supplied by the 9, Annex A of EN ISO 20349-1:
manufacturer 2017
2.4. PPE subject to ageing 9
2.7 PPE intended for rapid 7.8
intervention or to be put or
removed rapidly
2.12 PPE bearing one or more 8
identification or recognition marks
directly or indirectly relating to
health and safety
3.1.2.1 Prevention of falls due to 6 By reference to EN ISO
slipping 20345:2011
3.2 Protection against static 6 By reference to EN ISO
compression of a part of the body 20345:2011
3.3 Protection against mechanical 6 By reference to EN ISO
injuries 20345:2011
3.6 Protection against heat and/or 7.3, 7.4, 7.5, 7.6
fire
3.6.1. PPE constituent materials 7.3, 7.4, 7.5 No protection is foreseen for
and other components thermal effect of electrical arc
3.6.2. Complete PPE ready for use 7.4, 7.6, 9 Including information given in
Annex A of EN ISO 20349-1:2017

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
SIST EN ISO
...