EN ISO 20863:2004

SLOVENSKI STANDARD
01-april-2005
2EXWHY3UHVNXVQDPHWRGD]DRMDþLWYHYSHWQHPLQSUVWQHPGHOXþHYOMD
9H]OMLYRVW,62
Footwear - Test method for stiffeners and toepuffs - Bondability (ISO 20863:2004)
Schuhe - Prüfverfahren für Hinterkappen und Zehenkappen - Klebefestigkeit (ISO
20863:2004)
Chaussures - Méthodes d'essai pour cotreforts et renforts - Aptitude au collage (ISO
20863:2004)
Ta slovenski standard je istoveten z: EN ISO 20863:2004
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 20863
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 61.060
English version
Footwear - Test method for stiffeners and toepuffs - Bondability
(ISO 20863:2004)
Chaussures - Méthodes d'essai pour cotreforts et renforts - Schuhe - Prüfverfahren für Hinterkappen und Zehenkappen
Aptitude au collage (ISO 20863:2004) - Klebefestigkeit (ISO 20863:2004)
This European Standard was approved by CEN on 23 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20863:2004: E
worldwide for CEN national Members.

Contents
Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Apparatus and materials.4
5 Sampling and conditioning.5
5.1 Method 1: Heat activated materials.5
5.2 Method 2: Solvent activated materials .5
6 Procedure.5
7 Expression of results.6
7.1 Dry bondability.6
7.2 Wet bondability.6
8 Test report.7
Annex ZA (normative) Normative references to International publications with their
corresponding European publications.8

Foreword
This document (EN ISO 20863:2004) has been prepared by Technical Committee CEN/TC 309 "Footwear",
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at
the latest by June 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
1 Scope
This document specifies a method for the determination of the bondability of heat activated and solvent
activated stiffeners and toepuffs to upper and lining materials.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 12222, Footwear — Standard atmospheres for conditioning and testing of footwear and components for
footwear.
EN ISO 3696, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987).
EN ISO 4048, Leather — Determination of matter soluble in dichloromethane (ISO 4048:1977).
EN ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1:
Tension/compression testing machines — Verification and calibration of the force-measuring system (ISO
7500-1:2004).
3 Terms and definitions
For the purposes of this document, the following te
...