EN 4550-1:2003
(Main)Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical
Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical
This standard defines the dimensions and tolerances for the male sealing end of inch series pipe couplings, 37°, spherical, for aerospace applications.
Matched fluid system component shall have a female sealing end in accordance with EN 4550-4.
Luft- und Raumfahrt - Rohrverschraubung 37° - Konstruktionsblatt - Inch-Reihe - Teil 1: Kugelanschlüsse
Diese Norm legt die Maße und Grenzabmaße von Kugelanschlüssen für Rohrverschraubungen 37°, Inch-Reihe, für Anwendungen in der Luft- und Raumfahrt fest.
Das zugehörige Bauteil der fluidischen Anlage muss einen Kegelanschluss nach EN 4550-4 aufweisen.
Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical
General Information
- Status
- Withdrawn
- Publication Date
- 14-Jan-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 3 - Mechanical
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Dec-2014
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 4550-1:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical". This standard covers: This standard defines the dimensions and tolerances for the male sealing end of inch series pipe couplings, 37°, spherical, for aerospace applications. Matched fluid system component shall have a female sealing end in accordance with EN 4550-4.
This standard defines the dimensions and tolerances for the male sealing end of inch series pipe couplings, 37°, spherical, for aerospace applications. Matched fluid system component shall have a female sealing end in accordance with EN 4550-4.
EN 4550-1:2003 is classified under the following ICS (International Classification for Standards) categories: 49.080 - Aerospace fluid systems and components. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 4550-1:2003 has the following relationships with other standards: It is inter standard links to EN 4550-1:2014, EN 4550-4:2014, EN 10244-1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 4550-1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, sphericalLuft- und Raumfahrt - Rohrverschraubung 37° - Konstruktionsblatt - Inch-Reihe - Teil 1: KugelanschlüsseAerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4550-1:2003SIST EN 4550-1:2004en01-maj-2004SIST EN 4550-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4550-1January 2003ICS 49.080English versionAerospace series - Pipe coupling, 37° - Design configuration -Inch series - Part 1: Male sealing ends, sphericalThis European Standard was approved by CEN on 2 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4550-1:2003 ESIST EN 4550-1:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...