Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

This document specifies the requirements relating to:
Heat resisting alloy NI-PH2601
Solution treated and cold worked
Bar for forged fasteners
D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
for aerospace applications.

Luft‑ und Raumfahrt - Hochwarmfeste Legierung NI‑PH2601 - Lösungsgeglüht und kaltverfestigt - Stange für geschmiedete Verbindungselemente - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung NI-PH2601
Lösungsgeglüht und kaltverfestigt
Stange für geschmiedete Verbindungselemente
D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud NI-PH2601 - Mis en solution et écroui - Barre pour éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud NI-PH2601
Mis en solution et écroui
Barre pour éléments de fixation forgés D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina NI-PH2601 - Topilno žarjena in hladno preoblikovana - Palice za kovane vezne elemente - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa

Ta standard določa zahteve, ki se navezujejo na: toplotno odporno zlitino NI-PH 2601, topilno žarjena in hladno preoblikovana, palice za kovane vezne elemente D ≤ 50 mm, 1550 MPa ≤ Rm ≤ 1830 MPa.

General Information

Status
Published
Publication Date
14-Jan-2020
Withdrawal Date
30-Jul-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Jan-2020
Completion Date
15-Jan-2020

Buy Standard

Standard
EN 3666:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2020
Aeronavtika - Toplotno odporna zlitina NI-PH2601 - Topilno žarjena in hladno
preoblikovana - Palice za kovane vezne elemente - D ≤ 50 mm - 1550 MPa ≤ Rm ≤
1830 MPa
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked -
Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH2601 - Lösungsgeglüht und
kaltverfestigt - Stangen zum Stauchen für Verbindungselemente - D ≤ 50 mm - 1 550
MPa ≤ Rm ≤ 1 830 MPa
Série aérospatiale - Alliage résistant à chaud NI-PH2601 - Mis en solution et écroui -
Barres pour éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
Ta slovenski standard je istoveten z: EN 3666:2020
ICS:
49.025.99 Drugi materiali Other materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3666
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 49.025.99
English Version
Aerospace series - Heat resisting alloy NI-PH2601 -
Solution treated and cold worked - Bar for forged fasteners
- D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
Série aérospatiale - Alliage résistant à chaud NI- Luft- und Raumfahrt - Hochwarmfeste Legierung NI-
PH2601 - Mis en solution et écroui - Barre pour PH2601 - Lösungsgeglüht und kaltverfestigt - Stange
éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ für geschmiedete Verbindungselemente - D ≤ 50 mm -
Rm ≤ 1 830 MPa 1 550 MPa ≤ Rm ≤ 1 830 MPa
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3666:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

European foreword
This document (EN 3666:2020) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by July 2020, and conflicting national standards shall be withdrawn at
the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.