EN ISO 17633:2018/A1:2021

SLOVENSKI STANDARD
01-oktober-2021
Dodajni materiali za varjenje - Strženske žice in palice za obločno varjenje
nerjavnih in ognjeodpornih jekel v zaščitnem plinu in brez zaščite - Razvrstitev -
Dopolnilo A1 (ISO 17633:2017/Amd 1:2021)
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification -
Amendment 1 (ISO 17633:2017/Amd 1:2021)
Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen
mit und ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung -
Änderung 1 (ISO 17633:2017/Amd 1:2021)
Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage à
l’arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux
températures élevées - Classification - Amendement 1 (ISO 17633:2017/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 17633:2018/A1:2021
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 17633:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 25.160.20
English Version
Welding consumables - Tubular cored electrodes and rods
for gas shielded and non-gas shielded metal arc welding of
stainless and heat-resisting steels - Classification -
Amendment 1 (ISO 17633:2017/Amd 1:2021)
Produits consommables pour le soudage - Fils et Schweißzusätze - Fülldrahtelektroden und Füllstäbe
baguettes fourrés pour le soudage à l'arc avec ou sans zum Metall-Lichtbogenschweißen mit und ohne
protection gazeuse des aciers inoxydables et des aciers Gasschutz von nichtrostenden und hitzebeständigen
résistant aux températures élevées - Classification - Stählen - Einteilung - Änderung 1 (ISO
Amendement 1 (ISO 17633:2017/Amd 1:2021) 17633:2017/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 17633:2018; it was approved by CEN on 21 May 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17633:2018/A1:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 17633:2018/A1:2021) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
Un
...