EN 4166:2004

SLOVENSKI STANDARD
01-junij-2005
1DGRPHãþD
SIST EN 4166:2004
Aerospace series - Clips, spring tension, three parts - PTFE bushes
Aerospace series - Clips, spring tension, three parts - PTFE bushes
Luft- und Raumfahrt - Rohrschellen, federnd, dreiteilig - Hülsen aus PTFE
Série aérospatiale - Colliers de fixation a ressort en trois parties - Bagues en PTFE
Ta slovenski standard je istoveten z: EN 4166:2004
ICS:
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4166
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 49.080 Supersedes EN 4166:2003
English version
Aerospace series - Clips, spring tension, three parts - PTFE
bushes
Série aérospatiale - Colliers de fixation à ressort en trois Luft- und Raumfahrt - Rohrschellen, federnd, dreiteilig -
parties - Bagues en PTFE Hülsen aus PTFE
This European Standard was approved by CEN on 11 September 2003.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4166:2004: E
worldwide for CEN national Members.

Contents                                                                        Page

Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.4
4 Designation .6
5 Marking .6
6 Quality assurance.6
Foreword
This document (EN 4166:2004) has been prepared by the Eur
...