Occupational footwear for professional use - Part 2: Additional specifications

This European Standard specifies, by reference to EN 344:1992 (1) and EN 344-2, additionnal requirements for occupational footwear, relating to water resistance. Basic and further optional requirements for occupational footwear are given in EN 347:1992 (1). (1) Subsequent to the issue of EN 344-2 and EN 347-2, EN 344:1992 and EN 347:1992 will be renumbered into Parts 1.

Berufsschuhe für den gewerblichen Gebrauch - Teil 2: Zusätzliche Spezifikation

Dieser Europäische Normentwurf legt, mit Verweis auf EN 344 und prEN 344-2 zusätzliche Anforderungen an Berufsschuhe in bezug auf Wasserdichtheit fest. Die Grundanforderungen und weitere, Zusatzanforderungen an Berufsschuhe sind in EN 347 festgelegt.

Chaussures de travail à usage professionnel - Partie 2: Spécifications additionnelles

Cette norme européenne spécifie, en référence à la norme EN 344 et prEN 344-2, les exigences additionnelles pour chaussures de travail relatives à la résistance à l'eau. Des exigences fondamentales et optionnelles supplémentaires pour chaussures de travail à usage professionnel sont données dans la norme EN 347.

Delovna obutev za poklicno uporabo - 2. del: Dodatne specifikacije

General Information

Status

Withdrawn

Publication Date

23-Jul-1996

Withdrawal Date

31-Jul-2004

ICS

13.340.10 - Protective clothing

Technical Committee

CEN/TC 161 - Foot and leg protectors

Drafting Committee

CEN/TC 161/WG 2 - Specifications for footwear for professional use

Current Stage

9960 - Withdrawal effective - Withdrawal

Start Date

01-Aug-2004

Completion Date

01-Aug-2004

Directive

89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment

Mandate

M/BC/CEN/90/2 - Order for standardization concerning Personal Protective Equipment (P.P.E.)

Ref Project

SIST EN 347-2:1996 - Occupational footwear for professional use - Part 2: Additional specifications

Relations

Replaced By

EN ISO 20347:2004 - Personal protective equipment - Occupational footwear - (ISO 20347:2004)

Effective Date

22-Dec-2008

Buy Standard

Standard

EN 347-2:1996

English language

6 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 347-2:1996

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Delovna obutev za poklicno uporabo - 2. del: Dodatne specifikacijeBerufsschuhe für den gewerblichen Gebrauch - Teil 2: Zusätzliche SpezifikationChaussures de travail a usage professionnel - Partie 2: Spécifications additionnellesOccupational footwear for professional
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN

EN ISO 13997:2023(Main)

Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2023)

SIST EN ISO 13997:2023

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

Standard
31 pages
English language
sale 10% off
e-Library read for
1 day
Draft
26 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 11610:2023(Main)

Protective clothing - Vocabulary (ISO 11610:2023)

SIST EN ISO 11610:2023

This document contains a list of terms which are frequently used in the standardization of protective clothing (5.1.4) and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms.
The definitions are intended to support an unambiguous use of the terms listed.
This document is intended to serve as a reference document for the Working Groups of CEN/TC 162 and ISO/TC 94/SC 13 to ascertain what definitions already exist and may be used for setting up new standards and to provide guidance in the elaboration of new definitions.
NOTE - In addition to text written in the official ISO languages (English, French), this document gives text in German. This text is published under the responsibility of the Member Body for Germany (DIN) and is given for information only. Only the text given in the official languages can be considered as ISO text.

Standard
83 pages
English language
sale 10% off
e-Library read for
1 day
Draft
160 pages
English, French and German language
sale 10% off
e-Library read for
1 day

CEN

EN 4862:2023(Main)

Aerospace series - Rotorcraft constant wear lifejackets - Requirements, testing and marking

SIST EN 4862:2023

This document specifies requirements for constant wear lifejackets for use by helicopter crew members and passengers in the event of a ditching or water impact, to ensure minimum levels of performance. It only applies to constant wear lifejackets for use by adults and that are intended to be manually inflated after leaving the helicopter.
Helicopter constant wear lifejackets are sometimes designed to be worn with or without a helicopter immersion suit and/or emergency breathing system.

Standard
58 pages
English language
sale 10% off
e-Library read for
1 day
Draft
55 pages
English language
sale 10% off
e-Library read for
1 day

09-May-2023
13.340.10
ASD-STAN

CEN

EN 4863:2023(Main)

Aerospace series - Rotorcraft immersion suits - Requirements, testing and marking

SIST EN 4863:2023

This document specifies requirements for immersion suits for use by helicopter crew members and passengers in the event of a ditching or water impact, to ensure minimum levels of performance. It applies to immersion suits for use by adults only.

Standard
57 pages
English language
sale 10% off
e-Library read for
1 day
Draft
56 pages
English language
sale 10% off
e-Library read for
1 day

09-May-2023
13.340.10
ASD-STAN

CEN

EN 14058:2017+A1:2023(Main + Amendment)

Protective clothing - Garments for protection against cool environments

SIST EN 14058:2018+A1:2023

This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.

Standard
22 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN ISO 6942:2022(Main)

Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2022)

SIST EN ISO 6942:2022

This document specifies two complementary methods (method A and method B) for determining the behaviour of materials for heat protective clothing subjected to heat radiation.
These tests are carried out on representative single or multi-layer textiles or other materials intended for clothing for protection against heat. They are also applicable to assemblies, which correspond to the overall build up of a heat protective clothing assembly with or without underclothing,
Method A serves for visual assessment of any changes in the material after the action of heat radiation. With method B the protective effect of the materials is determined. The materials may be tested either by both methods or only by one of them.
The tests according to these two methods serve to classify materials; however, to be able to make a statement or prediction as to the suitability of a material for protective clothing additional criteria must be taken into account.
Since the tests are carried out at room temperature the results do not necessarily correspond to the behaviour of the materials at higher ambient temperatures and therefore are only to a limited extent suitable for predicting the performance of the protective clothing made from the materials under test.

Standard
21 pages
English language
sale 10% off
e-Library read for
1 day
Draft
17 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 17673:2022(Main)

Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements

SIST EN 17673:2022

This document applies to garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities.
This document does not concern validating claims that the integrated smart textiles and non-textile elements substitute directly any protection provided by the garment from a heat and flame perspective.
The integrated smart textiles and non-textile elements could include not only the parts integrated into the protective garment but also connections to transmit the data generated or exchange data with external devices. It is not within the scope of this document to evaluate either the data storage or transmission (including connectivity) to the external devices, nor the external devices. This document evaluates only the smart textiles and non-textile elements integrated into the garment.
This document supplements the requirements of EN ISO 11612 and EN ISO 13688 and does not replace any of the requirements cited in those documents.
This document sets additional testing and performance requirements linked specifically to the garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities. These additional requirements will depend on the functionality of the smart textiles or non-textile element and its needed efficacy during heat and flame hazards and risks from an electrical/electronic safety perspective in these situations.