prEN ISO 5674

SLOVENSKI STANDARD
oSIST prEN ISO 5674:2022
01-julij-2022
Traktorji ter kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskusi
trdnosti in obrabe ter merila sprejemljivosti (ISO/DIS 5674:2022)
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO)
drive-shafts - Strength and wear tests and acceptance criteria (ISO/DIS 5674:2022)
Traktoren und land- und forstwirtschaftliche Maschinen - Schutzeinrichtungen für
Gelenkwellen - Festigkeits- und Verschleißprüfungen und Annahmekriterien (ISO/DIS
5674:2022)
Tracteurs et matériels agricoles et forestiers - Protecteurs d'arbres de transmission à
cardans de prise de force (p.d.f) - Essais de résistance mécanique et d'usure et critères
d'acceptation (ISO/DIS 5674:2022)
Ta slovenski standard je istoveten z: prEN ISO 5674
ICS:
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
oSIST prEN ISO 5674:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5674:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5674:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5674
ISO/TC 23/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-05-03 2022-07-26
Tractors and machinery for agriculture and forestry —
Guards for power take-off (PTO) drive-shafts — Strength
and wear tests and acceptance criteria
Tracteurs et matériels agricoles et forestiers — Protecteurs d'arbres de transmission à cardans de prise de
force — Essais de résistance mécanique et d'usure et critères d'acceptation
ICS: 65.060.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5674:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5674:2022
ISO/DIS 5674:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5674:2022
ISO/DIS 5674:2022(E)
Contents Page
Foreword .iv
European Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General test conditions .
...