EN 3915:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specificationSORWQRRGSRUQHSérie aérospatiale - Douilles filetées, à paroi mince, à freinage interne, filetage MJ, en alliage résistant à chaud à base de nickel NI-PH2601 (NI-P100HT, Inconel 718), pour récupération - Classification : 1 275 MPa (à température ambiante) / 550 °C - Spécification techniqueLuft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, MJ-Gewinde, aus hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718), zur Nacharbeit von Bauteilen - Klasse: 1 275 MPa (bei Raumtemperatur) / 550 °C - Technische Lieferbedingungen49.030.99Drugi vezni elementiOther fastenersICS:SIST EN 3915:2008enTa slovenski standard je istoveten z:EN 3915:200801-julij-2008SIST EN 3915:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3915
April 2008 ICS 49.030.99 English Version
Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification: 1 275 MPa (at ambient temperature) / 550 °C - Technical specification
Série aérospatiale - Douilles filetées, à paroi mince, à freinage interne, filetage MJ, en alliage résistant à chaud à base de nickel NI-PH2601 (NI-P100HT, Inconel 718), pour récupération - Classification : 1 275 MPa (à température ambiante) / 550 °C - Spécification technique
Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, MJ-Gewinde, aus hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718), zur Nacharbeit von Bauteilen - Klasse: 1 275 MPa (bei Raumtemperatur) / 550 °C - Technische LieferbedingungenThis European Standard was approved by CEN on 29 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3915:2008: E

1) The strength class of the insert is equal to the minimum tensile stress which the insert is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of higher strength class. 2) Maximum test temperature of the parts. 3) Inactive for new designation, see EN 4376 and EN 4377. 4) Published as ASD Standard at the date of publication of this standard. 5) Published as ASD Prestandard at the date of publication of this standard.

6) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive,. PO Box C700, West Conshohocken, PA 19428-2959 USA. 7) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA.
...