EN ISO 8835-5:2004

SLOVENSKI STANDARD
01-november-2004
1DGRPHãþD
SIST EN 740:2000
SIST EN 740:2000/AC:2000
Inhalacijski anestezijski sistemi – 5. del: Anestezijski ventilatorji (ISO 8835-5:2004)
Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)
Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-
5:2004)
Systemes d'anesthésie par inhalation - Partie 5: Ventilateurs d'anesthésie (ISO 8835-
5:2004)
Ta slovenski standard je istoveten z: EN ISO 8835-5:2004
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8835-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2004
ICS 11.040.10 Supersedes EN 740:1998
English version
Inhalational anaesthesia systems - Part 5: Anaesthesia
ventilators (ISO 8835-5:2004)
Systèmes d'anesthésie par inhalation - Partie 5: Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-
Ventilateurs d'anesthésie (ISO 8835-5:2004) Beatmungsgeräte (ISO 8835-5:2004)
This European Standard was approved by CEN on 6 May 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8835-5:2004: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 8835-5:2004) has been prepared by Technical Committee ISO/TC 121
"Anaesthetic and respiratory equipment" in collaboration with Technical Committee CEN/TC 215
"Respiratory and anaesthetic equipment", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2004, and conflicting national
standards shall be withdrawn at the latest by November 2009.

This document supersedes EN 740:1998.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 8835-5:2004 has been approved by CEN as EN ISO 8835-5:2004 without any
modifications.
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42 EEC

This European Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 93/42 EEC.

Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s)
falling within the scope of this standard.

INTERNATIONAL ISO
STANDARD 8835-5
First edition
2004-05-15
Inhalational anaesthesia systems —
Part 5:
Anaesthetic ventilators
Systèmes d'anesthésie par inhalation —
Partie 5: Ventilateurs d'anesthésie

Reference number
ISO 8835-5:2004(E)
©
ISO 2004
ISO 8835-5:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved

ISO 8835-5:2004(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 General requirements and general requirements for tests . 3
5 Classification. 3
6 Identification, marking and documents. 3
7 Power input. 5
8 Basic safety categories . 6
9 Removable protective means . 6
10 Environmental conditions. 6
11 Not used. 6
12 Not used. 6
13 General. 6
14 Requirements related to classification . 6
15 Limitation of voltage and/or energy . 6
16 Enclosures and protective covers . 6
17 Separation. 6
18 Protective earthing, functional earthing and potential equalization . 6
19 Continuous leakage currents and patient auxiliary currents . 7
20 Dielectric strength. 7
21 Mechanical strength . 7
22 Moving parts. 7
23 Surfaces, corners and edges. 7
24 Stability in normal use. 7
25 Expelled parts. 7
26 Vibration and noise. 7
27 Pneumatic and hydraulic power. 7
28 Suspended masses. 7
29 X-Radiation . 7
30 Alpha, beta, gamma, neutron radiation and other particle radiation. 8
31 Microwave radiation. 8
32 Light radiation (including lasers) . 8
33 Infra-red radiation . 8
ISO 8835-5:2004(E)
34 Ultraviolet radiation.8
35 Acoustical energy (including ultrasonics).8
36 Electromagnetic compatibility .8
37 Locations and basic requirements.8
38 Marking and accompanying documents.8
39 Common requirements for category AP and category APG equipment .8
40 Requirements and tests for category AP equipment, parts and components thereof .9
41 Requirements and tests for category APG equipment, parts and components thereof .9
42 Excessive temperatures .9
43 Fire prevention.9
44 Overflow, spillage, leakage, humidity, ingress of liquids, cleaning, sterilization,
disinfection and compatibility.9
45 Pressure vessels and parts subject to pressure .10
46 Human errors .10
47 Electrostatic charges .10
48 Biocompatibility.10
49 Interruption of the power supply .10
50 Accuracy of operating data .10
51 Protection against hazardous output.10
52 Abnormal operation and fault conditions.11
53 Environmental tests .11
54 General .11
55 Enclosures and covers .11
56 Components and general assembly.11
57 Mains parts, components and layout.12
58 Protective earthing — Terminals and connections .12
59 Construction and layout .12
101 Additional requirements for anaesthetic ventilators.12
102 Appendices of IEC 60601-1:1988 .13
Annex AA (informative) Rationale .14
Annex BB (normative) Test for flammability of anaesthetic agents.15
Bibliography.16

iv © ISO 2004 – All rights reserved

ISO 8835-5:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8835-5 was prepared by Technical Committee ISO/TC 121, Anaesthetic and respiratory equipment,
Subcommittee SC 1, Breathing attachments and anaesthetic machines.
ISO 8835 consists of the following parts, under the general title Inhalational anaesthesia systems:
 Part 2: Anaesthetic breathing systems for adults
 Part 3: Anaesthetic gas scavenging systems — Transfer and receiving systems
 Part 4: Anaesthetic vapour delivery devices
 Part 5: Anaesthetic ventilators
NOTE ISO 8835-1, Medical electrical equipment — Part 1: Particular requirements for the safety of anaesthetic
workstations, was withdrawn in 1998 and replaced by the second edition of IEC 60601-2-13, Medical electrical
equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems.
ISO 8835-5:2004(E)
Introduction
This part of ISO 8835 is a Particular Standard based on IEC 60601-1:1988, including Amendments 1 (1991)
and 2 (1995), hereafter referred to as the General Standard. The General Standard is the basic standard for
the safety of all medical electrical equipment used by or under the supervision of qualified personnel in the
general medical and patient environment; it also contains certain requirements for reliable operation to ensure
safety.
The General Standard has associated Collateral Standards and Particular Standards. The Collateral
Standards include requirements for specific technologies and/or hazards and apply to all applicable equipment,
such as medical systems, EMC, radiation protection in diagnostic X-ray equipment, software, etc. The
Particular Standards apply to specific equipment types, such as medical electron accelerators, high frequency
surgical equipment, hospital beds, etc.
NOTE Definitions of Collateral Standard and Particular Standard can be found in IEC 60601-1:1988, 1.5 and A.2,
respectively.
To facilitate the use of this part of ISO 8835, the following drafting conventions have been applied.
This part of ISO 8835 uses the same main clause titles and numbering as the General Standard, for ease of
cross-referencing of the requirements. The changes to the text of the General Standard, as supplemented by
the Collateral Standards, are specified by the use of the following words.
 “Replacement” means that the indicated clause or subclause of the General Standard is replaced
completely by the text of this Particular Standard.
 “Addition” means that the relevant text of this Particular Standard is a new element (e.g. subclause, list
item, Note, table, figure) additional to the General Standard.
 “Amendment” means that an existing element of the General Standard is partially modified by deletion
and/or addition as indicated by the text of this Particular Standard.
To avoid confusion with any amendments to the General Standard itself, a particular numbering has been
employed for elements added by this part of ISO 8835: subclauses, tables and figures are numbered starting
from 101; additional list items are lettered aa), bb), etc. and additional annexes are lettered AA, BB, etc.
In this part of ISO 8835, the following print types are used:
 requirements, compliance with which can be verified, and definitions: roman type;
 notes and examples: smaller roman type;
 description of type of document change, and test methods: italic type;
 terms defined in the General Standard IEC 60601-1:1988, Clause 2 and terms defined in this part of
ISO 8835: bold type.
Throughout this part of ISO 8835, text for which a rationale is provided in Annex AA is indicated by an asterisk
∗
( ).
vi © ISO 2004 – All rights reserved

INTERNATIONAL STANDARD ISO 8835-5:2004(E)

Inhalational anaesthesia systems —
Part 5:
Anaesthetic ventilators
1 Scope
IEC 60601-1:1988, Clause 1 applies except as follows:
This part of ISO 8835 specifies particular requirements for the essential performance of anaesthetic
ventilators (as defined in 3.1). This part of ISO 8835 is applicable to anaesthetic ventilators which are
always a component of an anaesthetic system and are intended to be continuously attended by an operator.
This part of ISO 8835 is not applicable to anaesthetic ventilators intended for use with flammable
anaesthetics, as determined by Annex BB.
The requirements of this part of ISO 8835 which replace or modify the requirements of IEC 60601-1:1988 and
its Amendments 1 (1991) and 2 (1995) are intended to take precedence over the corresponding general
requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 407, Small medical gas cylinders — Pin-index yoke-type valve connections
ISO 4135:2001, Anaesthetic and respiratory equipment — Vocabulary
ISO 5145, Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning
ISO 5356-1, Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
IS
...