EN 2591-6404:2001
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load
This standard specifies a method of assessing the ability of a mated pair of optical connection elements (including permanent connections) and fibre optic couplers to withstand transverse loads without mechanical or optical damage.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6404: Optische Verbindungselemente - Querkraft
Diese Norm legt ein Verfahren zur Beurteilung der Widerstandsfähigkeit eines gekuppelten Paares von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber Querkräften fest, ohne dabei mechanischen oder optischen Schaden zu nehmen.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6404 : Organes optiques - Charge transversale
La présente norme prescrit une méthode pour déterminer la capacité pour des éléments de connexion optique (y compris les connexions permanentes) et des coupleurs à fibre optiques à supporter des contraintes transversales sans dommages mécanique et électrique.
Elle doit être utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse loadLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6404: Optische Verbindungselemente - QuerkraftSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6404 : Organes optiques - Charge transversaleAerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6404:2001SIST EN 2591-6404:2004en01-maj-2004SIST EN 2591-6404:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6404December 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6404: Optical elements - Transverse loadSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6404: Organesoptiques - Charge transversaleLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6404: OptischeElemente - QuerkraftThis European Standard was approved by CEN on 5 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6404:2001 ESIST EN 2591-6404:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.