EN 374-3:1994
(Main)Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
This standard covers the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasized that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.
Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 3: Bestimmung des Widerstandes gegen Permeation von Chemikalien
Diese Norm beinhaltet die Bestimmung des Widerstandes von Schutzhandschuh-Materialien gegen Permeation von nichtgasförmigen, möglicherweise gefährlichen Chemikalien bei ständigem Kontakt. Es wird ausdrücklich darauf hingewiesen, dass dieses Verfahren nicht die Bedingungen repräsentiert, wie sie in der Praxis angetroffen werden. Die Prüfergebnisse sollten deshalb hauptsächlich dazu verwendet werden, Materialien aufgrund der Durchbruchzeit zu vergleichen.
Gants de protection contre les produits chimiques et les micro-organismes - Partie 3: Détermination de la résistance à la perméation des produits chimiques
Cette norme concerne la détermination de la résistance des matériaux constituant les gants de protection à la perméation par des produits chimiques non gazeux potentiellement dangereux en cas de contact continu. Il convient donc d'insister sur le fait que cet essai ne rend pas compte des conditions susceptibles d'être rencontrées en service, et il est recommandé de n'utiliser les résultats de l'essai qui ont une valeur essentiellement relative, que pour comparer des matériaux par grandes catégories de temps de passage.
Varovalne rokavice za zaščito pred kemikalijami in mikroorganizmi - 3. del: Določanje odpornosti na pronicanje kemikalij
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jan-1994
- Withdrawal Date
- 09-Sep-2003
- Technical Committee
- CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
- Drafting Committee
- CEN/TC 162/WG 8 - Protective gloves
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2003
- Completion Date
- 10-Sep-2003
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 374-3:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals". This standard covers: This standard covers the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasized that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.
This standard covers the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasized that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.
EN 374-3:1994 is classified under the following ICS (International Classification for Standards) categories: 13.340.40 - Hand and arm protection. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 374-3:1994 has the following relationships with other standards: It is inter standard links to EN 374-3:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 374-3:1994 is associated with the following European legislation: EU Directives/Regulations: 89/686/EEC; Standardization Mandates: M/BC/CEN/88/8. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 374-3:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 3: Bestimmung des Widerstandes gegen Permeation von ChemikalienGants de protection contre les produits chimiques et les micro-organismes - Partie 3: Détermination de la résistance a la perméation des produits chimiquesProtective gloves against chemicals and micro-organisms - Part 3: Determination of resi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...