EN 12168:1998
(Main)Copper and copper alloys - Hollow rod for free machining purposes
Copper and copper alloys - Hollow rod for free machining purposes
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod supplied in straight lengths, specifically intended for free machining purposes. Note: Hollow products having an outside diameter greater than 80 mm, and/or a wall thickness less than 2 mm, are specified in prEN 12449. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
Kupfer und Kupferlegierungen - Hohlstangen für die spanende Bearbeitung
Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und die Grenzabmaße für in geraden Längen gelieferte Hohlstangen aus Kupferlegierungen für die spanende Bearbeitung fest. Anmerkung: Hohlstangen mit einem Außendurchmesser über 80 mm und/oder einer Wanddicke unter 2 mm sind in prEN 12449 festgelegt. Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Norm und die Lieferbedingungen sind ebenfalls festgelegt.
Cuivre et alliages de cuivre - Barres creuses pour décolletage
La présente norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles des barres creuses en cuivre et alliages de cuivre livrées en longueurs droites, particulièrement destinées pour le décolletage. Note: Les produits creux de diamètre extérieur supérieur à 80 mm et/ou d'épaisseur inférieure à 2 mm sont traités dans le prEN 12449. Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux prescriptions de la présente norme et les conditions de livraison sont également spécifiées.
Baker in bakrove zlitine - Votle palice različnih prerezov za obdelavo z odrezovanjem na avtomatih
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jan-1998
- Withdrawal Date
- 31-May-2011
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jun-2011
- Completion Date
- 01-Jun-2011
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 12168:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Hollow rod for free machining purposes". This standard covers: This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod supplied in straight lengths, specifically intended for free machining purposes. Note: Hollow products having an outside diameter greater than 80 mm, and/or a wall thickness less than 2 mm, are specified in prEN 12449. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy hollow rod supplied in straight lengths, specifically intended for free machining purposes. Note: Hollow products having an outside diameter greater than 80 mm, and/or a wall thickness less than 2 mm, are specified in prEN 12449. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
EN 12168:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12168:1998 has the following relationships with other standards: It is inter standard links to EN 12168:2011, EN 12288:2010, EN 12168:1998/A1:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12168:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kupfer und Kupferlegierungen - Hohlstangen für die spanende BearbeitungCuivre et alliages de cuivre - Barres creuses pour décolletageCopper and copper alloys - Hollow rod for free machining purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 12168:1998SIST EN 12168:1999en01-november-1999SIST EN 12168:1999SLOVENSKI
STANDARD
SI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...