Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2015)

ISO 19901-1:2015 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries.
The requirements are divided into two broad types:
-      those that relate to the determination of environmental conditions in general, together with the metocean parameters that are required to adequately describe them;
-      those that relate to the characterization and use of metocean parameters for the design, the construction activities or the operation of offshore structures.
The environmental conditions and metocean parameters discussed are:
-      extreme and abnormal values of metocean parameters that recur with given return periods that are considerably longer than the design service life of the structure,
-      long-term distributions of metocean parameters, in the form of cumulative, conditional, marginal or joint statistics of metocean parameters, and
-      normal environmental conditions that are expected to occur frequently during the design service life of the structure.
Metocean parameters are applicable to:
-      the determination of actions for the design of new structures,
-      the determination of actions for the assessment of existing structures,
-      the site-specific assessment of mobile offshore units,
-      the determination of limiting environmental conditions, weather windows, actions and action effects for pre-service and post-service situations (i.e. fabrication, transportation and installation or decommissioning and removal of a structure), and
-      the operation of the platform, where appropriate.
NOTE          Specific metocean requirements for site-specific assessment of jack-ups are contained in ISO 19905‑1, for arctic offshore structures in ISO 19906 and for topside structures in ISO 19901‑3.

Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 1: Grundsätze für die Auslegung und den Betrieb auf dem offenen Meer

Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 1: Dispositions océano-météorologiques pour la conception et l'exploitation (ISO 19901-1:2015)

L'ISO 19901-1:2015 fournit des exigences générales relatives à la détermination et à l'utilisation des conditions océanographiques et météorologiques («océano-météorologiques») pour la conception, la construction et l'exploitation des structures en mer de tous les types utilisés dans les industries du pétrole et du gaz naturel.
Les exigences sont scindées en deux grandes catégories:
?   celles liées à la détermination des conditions environnementales en général, associées aux paramètres océano-météorologiques requis pour les décrire de manière appropriée;
?   celles liées à la caractérisation et à l'utilisation des paramètres océano-météorologiques pour la conception, les activités de construction ou l'exploitation des structures en mer.
Les conditions environnementales et les paramètres océano-météorologiques examinés sont:
?   les valeurs extrêmes et anormales des paramètres océano-météorologiques qui réapparaissent à des intervalles de récurrence donnés nettement plus longs que la durée de vie en service de la structure;
?   les distributions à long terme des paramètres océano-météorologiques, sous forme de statistiques cumulées, conditionnelles, marginales ou conjointes; et
?   les conditions environnementales normales dont l'occurrence fréquente est attendue tout au long de la durée de vie en service de la structure.
Les paramètres océano-météorologiques sont applicables à:
?   la détermination des actions pour la conception des nouvelles structures;
?   la détermination des actions pour l'évaluation des structures existantes;
?   l'évaluation spécifique au site des unités mobiles en mer;
?   la détermination des conditions environnementales restrictives, des fenêtres météorologiques, des actions et de leurs effets pour les situations de pré- et post-service (c'est-à-dire la fabrication, le transport et l'installation ou la mise hors service et l'enlèvement d'une structure); et
?   l'exploitation de la plate-forme, le cas échéant.

Industrija za predelavo nafte in zemeljskega plina - Posebne zahteve za naftne ploščadi - 1. del: Določila za načrtovanje in obratovanje ob upoštevanju oceanografskih in meteoroloških vidikov (ISO 19901-1:2015)

Ta del standarda ISO 19901 vsebuje splošne zahteve za določanje in uporabo meteoroloških in
oceanografskih (metoceanskih) pogojev za načrtovanje, gradnjo in delovanje naftnih ploščadi
vseh vrst, ki se uporabljajo v industriji nafte in zemeljskega plina.
Zahteve so razdeljene v dve osnovni vrsti:
– zahteve, povezane z določanjem okoljskih pogojev na splošno, skupaj z meteorološkimi in oceanografskimi parametri, ki so potrebni za njihov ustrezen opis;
– zahteve, povezane z opredelitvijo in uporabo meteoroloških in oceanografskih parametrov za načrtovanje, gradbene dejavnosti ali delovanje naftnih ploščadi.
Okoljski pogoji ter obravnavani meteorološki in oceanografski parametri so naslednji:
– ekstremne in nenormalne vrednosti meteoroloških in oceanografskih parametrov, ki se pojavljajo z določenimi povratnimi dobami, ki so precej daljše od življenjske dobe strukture,
– dolgoročne motnje meteoroloških in oceanografskih parametrov v obliki kumulativnih, pogojnih, mejnih ali skupnih statističnih podatkov o meteoroloških in oceanografskih parametrih ter
– običajni okoljski pogoji, ki naj bi se pogosto pojavili med življenjsko dobo strukture.
Meteorološki in oceanografski parametri se uporabljajo za:
– določanje ukrepov za načrtovanje novih struktur,
– določanje ukrepov za oceno obstoječih struktur,
– oceno mobilnih naftnih ploščadi na področju postavitve,
– določanje omejenih okoljskih pogojev, vremenskih oken, ukrepov in učinkov ukrepov za okoliščine pred storitvijo in po njej (tj. izdelava, promet in namestitev ali prenehanje uporabe ter odstranitev strukture) in
– po potrebi delovanje platforme.
OPOMBA: Posebne meteorološke in oceanografske zahteve za oceno dvižnih ploščadi na področju postavitve so zajete v standardu ISO 19905-1, za arktične naftne ploščadi v standardu ISO 19906 in za strukture na palubi v standardu ISO 19901-3.

General Information

Status
Published
Publication Date
10-Nov-2015
Withdrawal Date
30-May-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Nov-2015
Completion Date
11-Nov-2015

Relations

Buy Standard

Standard
EN ISO 19901-1:2016 - BARVE
English language
216 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2016
1DGRPHãþD
SIST EN ISO 19901-1:2006
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3RVHEQH]DKWHYH]DQDIWQH
SORãþDGLGHO'RORþLOD]DQDþUWRYDQMHLQREUDWRYDQMHREXSRãWHYDQMX
RFHDQRJUDIVNLKLQPHWHRURORãNLKYLGLNRY ,62
Petroleum and natural gas industries - Specific requirements for offshore structures -
Part 1: Metocean design and operating considerations (ISO 19901-1:2015)
Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 1:
Grundsätze für die Auslegung und den Betrieb auf dem offenen Meer (ISO 19901-
1:2015)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures
en mer - Partie 1: Dispositions océano-météorologiques pour la conception et
l'exploitation (ISO 19901-1:2015)
Ta slovenski standard je istoveten z: EN ISO 19901-1:2015
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19901-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2015
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN ISO 19901-1:2005
English Version
Petroleum and natural gas industries - Specific
requirements for offshore structures - Part 1: Metocean
design and operating considerations (ISO 19901-1:2015)
Industries du pétrole et du gaz naturel - Exigences Erdöl- und Erdgasindustrie - Erdöl- und
spécifiques relatives aux structures en mer - Partie 1: Erdgasindustrie - Spezielle Anforderungen für
Dispositions océano-météorologiques pour la Offshore-Anlagen - Teil 1: Grundsätze für die
conception et l'exploitation (ISO 19901-1:2015) Auslegung und den Betrieb auf dem offenen Meer (ISO
19901-1:2015)
This European Standard was approved by CEN on 17 July 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19901-1:2015 E
worldwide for CEN national Members.

Contents Page
European Foreword . 3

European Foreword
This document (EN ISO 19901-1:2015) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 19901-1:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19901-1:2015 has been approved by CEN as EN ISO 19901-1:2015 without any
modification.
INTERNATIONAL ISO
STANDARD 19901-1
Second edition
2015-10-15
Petroleum and natural gas
industries — Specific requirements
for offshore structures —
Part 1:
Metocean design and operating
considerations
Industries du pétrole et du gaz naturel — Exigences spécifiques
relatives aux structures en mer —
Partie 1: Dispositions océano-météorologiques pour la conception et
l’exploitation
Reference number
ISO 19901-1:2015(E)
©
ISO 2015
ISO 19901-1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 19901-1:2015(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 2
4 Symbols and abbreviated terms . 9
4.1 Symbols . 9
4.2 Abbreviated terms .12
5 Determining the relevant metocean parameters .12
5.1 General .12
5.2 Expert development of metocean criteria .13
5.3 Selecting appropriate parameters for determining design actions and action effects .13
5.4 The metocean database .14
5.5 Storm types in a region .14
5.6 Directionality .14
5.7 Extrapolation to extreme and abnormal conditions .15
5.8 Metocean parameters for fatigue assessments .15
5.9 Metocean parameters for short-term activities.16
5.10 Metocean parameters for medium-term activities .17
6 Water depth, tides and storm surges .17
6.1 General .17
6.2 Tides .17
6.3 Storm surges .18
6.4 Extreme water level .18
7 Wind .19
7.1 General .19
7.2 Wind actions and action effects .20
7.3 Wind profile and time-averaged wind speed.21
7.4 Wind spectra .21
8 Waves .21
8.1 General .21
8.2 Wave actions and action effects .22
8.3 Sea states — Spectral waves .23
8.3.1 Wave spectrum .23
8.3.2 Directional spreading .23
8.3.3 Wave periods .23
8.3.4 Wave kinematics — Velocities and accelerations .23
8.4 Regular (periodic) waves .24
8.4.1 General.24
8.4.2 Wave period .24
8.4.3 Wave kinematics — Velocities and accelerations .24
8.4.4 Intrinsic, apparent and encounter wave periods .24
8.5 Maximum height of an individual wave for long return periods .25
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.