EN 12167:1998
(Main)Copper and copper alloys - Profiles and rectangular bar for general purposes
Copper and copper alloys - Profiles and rectangular bar for general purposes
This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy profiles and rectangular bars supplied in straight lengths. This standard applies to rectangular bar with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
Kupfer und Kupferlegierungen - Profile und Rechteckstangen zur allgemeinen Verwendung
Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und die Grenzabmaße für Profile und Rechteckstangen aus Kupfer und Kupferlegierungen in geraden Längen fest. Diese Norm gilt für Rechteckstangen mit Dicken von 3 mm bis 60 mm und Breiten von 6 mm bis 120 mm. Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Norm und die Lieferbedingungen sind ebenfalls festgelegt.
Cuivre et alliages de cuivre - Profilés et barres rectangulaires pour usages généraux
La présente norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles des profilés et des barres rectangulaires en cuivre et alliages de cuivre livrés en longueurs droites. La présente norme s'applique aux barres rectangulaires d'épaisseurs allant de 3 mm à 60 mm compris et de largeurs allant de 6 mm à 120 mm compris. Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux prescriptions de la présente norme et les conditions de livraisons sont également spécifiées.
Baker in bakrove zlitine - Profili in palice s pravokotnim prerezom za splošno uporabo
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jan-1998
- Withdrawal Date
- 31-May-2011
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jun-2011
- Completion Date
- 01-Jun-2011
Relations
- Effective Date
- 28-May-2011
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 12167:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Profiles and rectangular bar for general purposes". This standard covers: This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy profiles and rectangular bars supplied in straight lengths. This standard applies to rectangular bar with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
This European Standard specifies the composition, property requirements and dimensional tolerances for copper and copper alloy profiles and rectangular bars supplied in straight lengths. This standard applies to rectangular bar with thicknesses from 3 mm up to and including 60 mm and with widths from 6 mm up to and including 120 mm. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
EN 12167:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12167:1998 has the following relationships with other standards: It is inter standard links to EN 12167:2011, EN 12288:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12167:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Profili in palice s pravokotnim prerezom za splošno uporaboKupfer und Kupferlegierungen - Profile und Rechteckstangen zur allgemeinen VerwendungCuivre et alliages de cuivre - Profilés et barres rectangulaires pour usages générauxCopper and copper alloys - Profiles and rectangular bar for general purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 12167:1998SIST EN 12167:1999en01-november-1999SIST EN 12167:1999SLOVENSKI
STANDARD
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...