EN 4058:2001
(Main)Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions
Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions
This standard specifies the dimensions and tolerances of:
Filler rods and filler wires for welding
in titanium and titanium alloys
Diameter 0,5 mm * D * 5,0 mm
for aerospace applications.
Luft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Titan und Titanlegierungen - Durchmesser 0,5 mm # D # 5,0 mm - Maße
Diese Norm legt die Maße und Toleranzen von:
Schweißzusatzstäben und -drähten
aus Titan und Titanlegierungen
Durchmesser 0,5 mm = D = 5,0 mm
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Baguettes et fils d'apport de soudage en titane et alliages de titane - Diamètres 0,5 mm < = D < = 5,0 mm - Dimensions
Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions
General Information
- Status
- Published
- Publication Date
- 18-Sep-2001
- Withdrawal Date
- 30-Mar-2002
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 4 - Metallic
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 01-Jun-2017
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN 4058:2001 - “Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm ≤ D ≤ 5,0 mm - Dimensions” is a CEN/AECMA standard that specifies dimensions and tolerances for filler rods and filler wires used in welding titanium and titanium alloys for aerospace applications. The standard defines nominal diameters, recommended linear mass, lengths, and geometric tolerances relevant to welding consumables used in aircraft and space industry manufacturing.
Key Topics
- Scope and range: Applicable to filler rods and filler wires with diameters 0.5 mm to 5.0 mm for aerospace use.
- Recommended dimensions and mass: Tables provide nominal diameters, section areas and recommended linear mass values (calculated using a reference density of 4.5 kg/dm³).
- Length requirements:
- Rods: supplied length typically 1 000 mm (order must specify fixed or random lengths; if random, min/max must be stated).
- Wires: length to be specified on the order.
- Dimensional tolerances:
- Rod diameters: tolerance given for the 0.8–5.0 mm range.
- Wire diameters: separate tolerance bands are provided depending on diameter sub-ranges (detailed tables are included in the standard).
- Geometric tolerances: Roundness must be contained within the specified diameter tolerances.
- Normative reference: EN 4258 (general organization of aerospace metallic material standards) is referenced for series context and links between EN standards.
Applications
- Ensures consistent sizing and interchangeability of titanium welding consumables used in aerospace fabrication, repair and overhaul.
- Used by:
- Aerospace manufacturers and subcontractors specifying welding filler stock.
- Welding consumable suppliers and manufacturers to qualify product dimensions.
- Purchasing and quality assurance teams to verify incoming material tolerances.
- Design and manufacturing engineers when specifying welding consumables for titanium structures and components.
Practical value
- Standardized diameters and tolerances reduce variability in weld quality and facilitate supply chain consistency.
- Clear length and mass recommendations simplify inventory, material planning and part traceability for aerospace programs.
- Geometric tolerance limits (roundness within diameter tolerance) support predictable feeding and deposition behavior during welding operations.
Related Standards
- EN 4258 - Aerospace series: general organization of metallic material standards (referenced normative document in EN 4058:2001).
Keywords: EN 4058:2001, filler rods, filler wires, titanium welding, aerospace standard, welding consumables, diameter 0.5–5.0 mm, dimensions and tolerances.
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 4058:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions". This standard covers: This standard specifies the dimensions and tolerances of: Filler rods and filler wires for welding in titanium and titanium alloys Diameter 0,5 mm * D * 5,0 mm for aerospace applications.
This standard specifies the dimensions and tolerances of: Filler rods and filler wires for welding in titanium and titanium alloys Diameter 0,5 mm * D * 5,0 mm for aerospace applications.
EN 4058:2001 is classified under the following ICS (International Classification for Standards) categories: 49.025.30 - Titanium. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 4058:2001 has the following relationships with other standards: It is inter standard links to EN 4258:2024, EN 3879:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 4058:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Titan und Titanlegierungen - Durchmesser 0,5 mm # D # 5,0 mm - MaßeSérie aérospatiale - Baguettes et fils d'apport de soudage en titane et alliages de titane - Diametres 0,5 mm < =
D < =
5,0 mm - DimensionsAerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < =
D < =
5,0 mm - Dimensions49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 4058:2001SIST EN 4058:2002en01-januar-2002SIST EN 4058:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4058September 2001ICS 49.025.30English versionAerospace series - Filler rods and filler wires for welding intitanium and titanium alloys - Diameter 0,5 mm
D
5,0 mm -DimensionsSérie aérospatiale - Baguettes et fils d'apport de soudageen titane et alliages de titane - Diamètres 0,5 mm
D
5,0mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte ausTitan und Titanlegierungen - Durchmesser 0,5 mm
D 5,0 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4058:2001 ESIST EN 4058:2002
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...