iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 4018:2000

(Main)

Hexagon head screws - Product grade C (ISO 4018:1999)

Hexagon head screws - Product grade C (ISO 4018:1999)

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months because //FV has been missed (Res BT C 243/1999) (CC/991125)

Sechskantschrauben mit Gewinde bis Kopf - Produktklasse C (ISO 4018:1999)

Diese Internationale Norm legt Eigenschaften von Sechskantschrauben mit Gewinde bis Kopf, mit Gewinden von M 5 bis M 64 und Produktklasse C fest. ANMERKUNG: Die Sechskantschrauben entsprechen denen nach ISO 4016 und haben lediglich Gewinde bis Kopf. Falls in besonderen Fällen andere Festlegungen als die in dieser Norm aufgeführten benötigt werden, sollten diese den entsprechenden ISO-Normen entnommen werden, z.B. ISO 724, ISO 888, ISO 898-1, ISO 965-1 und ISO 4759-1.

Vis à tête hexagonale entièrement filetées - Grade C (ISO 4018:1999)

La présente Norme internationale spécifie les caractéristiques des vis à tête hexagonale entièrement filetées de filetage M5 à M64 inclus, de grade C.  NOTE:  Ce type de produit est le même que celui qui est traité dans l'ISO 4016, à l'exception du filetage jusque sous tête. Si, dans des cas particuliers, des spécifications autres que celles figurant dans la présente Norme internationale sont requises, il est recommandé de les prendre dans les Normes internationales existantes, par exemple ISO 724, ISO 888, ISO 898-1, ISO 965-1 et ISO 4759-1.

Vijaki s šestrobo glavo z navojem do glave - Razred izdelave C (ISO 4018:1999)

General Information

Status
Withdrawn
Publication Date
21-Nov-2000
Withdrawal Date
31-Mar-2011
ICS
21.060.10 - Bolts, screws, studs
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Apr-2011
Completion Date
01-Apr-2011
Ref Project
SIST EN ISO 4018:2002 - Hexagon head screws - Product grade C (ISO 4018:1999)

Relations

Replaces
EN 24018:1991 - Hexagon head screws - Product grade C (ISO 4018:1988)
Effective Date
22-Dec-2008
Replaced By
EN ISO 4018:2011 - Hexagon head screws - Product grade C (ISO 4018:2011)
Effective Date
12-Apr-2010

Buy Standard

EN ISO 4018:2002EN ISO 4018:2002
PreviousNext
Standard
EN ISO 4018:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4018:2002
01-julij-2002
1DGRPHãþD
SIST EN 24018:1996
Vijaki s šestrobo glavo z navojem do glave - Razred izdelave C (ISO 4018:1999)
Hexagon head screws - Product grade C (ISO 4018:1999)
Sechskantschrauben mit Gewinde bis Kopf - Produktklasse C (ISO 4018:1999)
Vis a tete hexagonale entierement filetées - Grade C (ISO 4018:1999)
Ta slovenski standard je istoveten z: EN ISO 4018:2000
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 4018:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4018:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 4018:2002

---------------------- Page: 3 ----------------------

SIST EN ISO 4018:2002

---------------------- Page: 4 ----------------------

SIST EN ISO 4018:2002

---------------------- Page: 5 ----------------------

SIST EN ISO 4018:2002

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7380-1:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
SIST EN ISO 7380-1:2023

This document specifies the characteristics of hexagon socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If, in certain cases, other specifications are requested, stainless steel grades can be selected from ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7380-2:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
SIST EN ISO 7380-2:2023

This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14581:2023(Main)
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
SIST EN ISO 14581:2023

This document specifies the characteristics of hexalobular socket countersunk flat head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M10, and with product grade A.
If in certain cases other specifications are requested, stainless steel grades can be selected from ISO 3506‑1, and dimensional options from ISO 888 or ISO 4753.
NOTE 1   The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 3.
NOTE 2   Hexalobular socket countersunk head screws (high head), with full loadability are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
NOTE 3   Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2702:2022(Main)
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
SIST EN ISO 2702:2023

This document specifies the mechanical and physical properties of heat treated tapping screws made of steel, with thread sizes ST2,2 to ST9,5 in accordance with ISO 1478, when tested at the ambient temperature range of 10 °C to 35 °C, and the related test methods.
Tapping screws are designed to form mating threads in sheet metals, without their own threads being deformed. Tapping screws are not intended to be pretensioned by design, even though they can experience varying degrees of low-level tensile stress after installation.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8676:2022(Main)
Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)
SIST EN ISO 8676:2022

This document specifies the characteristics of hexagon head screws, in steel and stainless steel, with metric fine pitch threads M8×1 to M64×4, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4014:2022(Main)
Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)
SIST EN ISO 4014:2022

This document specifies the characteristics of hexagon head bolts, in steel and stainless steel, with metric coarse pitch threads M1,6 to M64, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4018:2022(Main)
Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)
SIST EN ISO 4018:2022

This document specifies the characteristics of hexagon head screws, in steel, with metric coarse pitch threads M5 to M64, and with product grade C.
If in certain cases other specifications are requested, property classes can be selected from ISO 898-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4015:2022(Main)
Fasteners - Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) - Product grade B (ISO 4015:2022)
SIST EN ISO 4015:2022

This document specifies the characteristics of hexagon head bolts with reduced shank (shank diameter approximately equal to pitch diameter), in steel and stainless steel, with metric coarse pitch threads M3 to M20, and with product grade B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.
NOTE      For hexagon head bolts with full shank, see ISO 4014.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8765:2022(Main)
Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B (ISO 8765:2022)
SIST EN ISO 8765:2022

This document specifies the characteristics of hexagon head bolts, in steel and stainless steel, with metric fine pitch threads M8×1 to M64×4, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and dimensional options from ISO 888 or ISO 4753.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4016:2022(Main)
Fasteners - Hexagon head bolts - Product grade C (ISO 4016:2022)
SIST EN ISO 4016:2022

This document specifies the characteristics of hexagon head bolts, in steel, with metric coarse pitch threads M5 to M64, and with product grade C.
If in certain cases other specifications are requested, property classes can be selected from ISO 898-1 and dimensional options from ISO 888 or ISO 4753.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day