prEN 13763-12
(Main)Explosives for civil uses - Detonators and detonating cord relays - Part 12: Determination of resistance to hydrostatic pressure
Explosives for civil uses - Detonators and detonating cord relays - Part 12: Determination of resistance to hydrostatic pressure
This document specifies a method for determination of resistance to hydrostatic pressure of electric detonators, non-electric detonators, electronic detonators, surface connectors and detonating cord relays.
Detonating cord relays, stated by the manufacturer to be used in dry conditions, are excluded.
This document is applicable to explosives for civil uses.
Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 12: Bestimmung der Widerstandsfähigkeit gegen hydrostatischen Druck
Dieses Dokument legt ein Verfahren für die Bestimmung der Widerstandsfähigkeit von elektrischen Zündern, nichtelektrischen Zündern, elektronischen Zündern, Oberflächenverbindern und Sprengschnurverbindern gegen hydrostatischen Druck fest.
Sprengschnurverbindern, die nach Herstellerangaben unter trockenen Bedingungen zu verwenden sind, werden hiervon ausgeschlossen.
Dieses Dokument gilt für Explosivstoffe für zivile Zwecke.
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 12 : Détermination de la résistance à la pression hydrostatique
Le présent document spécifie une méthode de détermination de la résistance à la pression hydrostatique des détonateurs électriques, non électriques, électroniques, des connecteurs de surface et des relais pour cordeau détonant.
Les relais pour cordeau détonant, conditionnés par le fabricant pour être utilisés en condition sèche, sont exclus.
Le présent document s’applique aux explosifs à usage civil.
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 12. del: Ugotavljanje odpornosti proti hidrostatičnemu tlaku
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13763-12:2021
01-april-2021
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 12. del: Ugotavljanje
odpornosti proti hidrostatičnemu tlaku
Explosives for civil uses - Detonators and relays - Part 12:Determination of resistance to
hydrostatic pressure
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 12:
Bestimmung der Widerstandsfähigkeit gegen hydrostatischen Druck
Explosifs à usage civil - Détonateurs et relais - Partie 12: Détermination de la résistance
à la pression
Ta slovenski standard je istoveten z: prEN 13763-12
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-12:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13763-12:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13763-12:2021
DRAFT
EUROPEAN STANDARD
prEN 13763-12
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 71.100.30 Will supersede EN 13763-12:2003
English Version
Explosives for civil uses - Detonators and detonating cord
relays - Part 12: Determination of resistance to hydrostatic
pressure
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 12 : Détermination de la Sprengschnurverbinder - Teil 12: Bestimmung der
résistance à la pression Widerstandsfähigkeit gegen hydrostatischen Druck
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-12:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13763-12:2021
prEN 13763-12:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Reagents . 6
6 Apparatus . 6
6.1 Electric, non-electric and electronic detonators intended for down hole use . 6
6.2 Surface connectors and detonating cord relays intended for use on the surface . 7
)
7 Preparation and handling of te
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.