EN 3464:2012
(Main)Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100 mm
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100 mm
This European Standard specifies the requirements relating to:
Titanium alloy Ti-6Al-4V
Annealed
Plate
6 mm < a ≤ 100 mm
for aerospace applications.
Luft- und Raumfahrt - Titanlegierung Ti-6Al-4V - Geglüht - Platten - 6 mm < a ≤ 100 mm
Diese Norm legt die Anforderungen an
Titanlegierung Ti 6Al-4V
Geglüht
Platten
6 mm a 100 mm
für die Anwendung in der Luft und Raumfahrt fest.
Série aérospatiale - Alliage de titane Ti-6Al-4V - Recuit - Plaques - 6 mm < a ≤ 100 mm
La présente norme spécifie les exigences relatives à :
Alliage de titane Ti-6Al-4V
Recuit
Plaques
6 mm a 100 mm
pour les applications aérospatiales
Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjeno - Plošče - 6 mm < a ≤ 100 mm
Ta evropski standard določa zahteve glede: titanove zlitine Ti-6Al-4V; žarjena; plošče 6 mm < a ≤ 100 mm; za uporabo v aeronavtiki.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3464:2012SIST EN 3464:2012en,fr,de01-oktober-2012SIST EN 3464:2012SLOVENSKI
STANDARDSIST EN 3464:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3464
August 2012 ICS 49.025.30 Supersedes EN 3464:2009English Version
Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate -6 mm < a ≤ 100 mm
Série aérospatiale - Alliage de titane Ti-6Al-4V - Recuit - Plaques - 6 mm < a ≤ 100 mm
Luft- und Raumfahrt - Titanlegierung Ti-6Al-4V - Geglüht - Platten - 6 mm < a ≤ 100 mm This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3464:2012: ESIST EN 3464:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.