EN 2252:2024

SLOVENSKI STANDARD
01-marec-2025
Aeronavtika - Jeklo 15CrMoV6 (1.7334) - Izkovki - Palice - De ≤ 100 mm - 1080 MPa
≤ Rm ≤ 1250 MPa
Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - De ≤ 100 mm - 1 080
MPa ≤ Rm ≤ 1 250 MPa
Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Gesenk- und Freiformschmiedestücke
- Stangen - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
Série aérospatiale - Acier 15CrMoV6 (1.7334) - Pièces forgées ou matricées - Barres -
De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
Ta slovenski standard je istoveten z: EN 2252:2024
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2252
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2252:2012
English Version
Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - D
e
≤ 100 mm - 1 080 MPa ≤ R ≤ 1 250 MPa
m
Série aérospatiale - Acier 15CrMoV6 (1.7334) - Pièces Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) -
≤ 100 mm - 1 080 MPa ≤ R ≤ ≤
forgées ou matricées - De m Gesenk- und Freiformschmiedestücke - Stangen - De
1 250 MPa
100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
This European Standard was approved by CEN on 18 November 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2252:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 2252:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2025, and conflicting national standards shall be withdrawn at
the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2252:2012.
The main changes with respect to the previous edition are as follows:
— EN 2252 (P1), 02/2012:
o correction of the title: removal of semi-product “bars”;
o correction of the format of Table 1 to comply with the requirements of the EN 4500 series;
o Table 1, line 6.1: addition of note a regarding the heat treatment cycle;
o addition o
...