EN 3351:2012
(Main)Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm
Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm
This European Standard specifies the requirements relating to: )
Titanium alloy Ti-4Al-4Mo-2Sn
Solution treated and aged
Forgings
De < or = 150 mm
for aerospace application.
NOTE Other designation: WL: 3.7184
Only the chemical composition of this standard must be considered.
Luft- und Raumfahrt - Titanlegierung Ti-4Al-4Mo-2Sn - Lösungsgeglüht und ausgelagert - Schmiedestücke - De ≤ 150 mm
Diese Norm legt die Anforderungen an )
Titanlegierung Ti-4Al-4Mo-2Sn
Lösungsgeglüht und ausgelagert
Schmiedestücke
De 150 mm
zur Anwendung in der Luft- und Raumfahrt fest.
Anmerkung: Andere gültige Bezeichnungen:
Ti550,
AECMA: TI-P63,
ASD-STAN: TI-P63001.
Série aérospatiale - Alliage de titane Ti-4Al-4Mo-2Sn - Mis en solution et revenu - Pièces forgées ou matricées - De ≤ 150 mm
Cette Norme européenne spécifie les exigences relatives à : )
Alliage de titane Ti-4Al-4Mo-2Sn
Mis en solution et revenu
Pièces forgées ou matricées
De 150 mm
pour applications aérospatiales.
NOTE Autre désignation :
Ti550,
AECMA : TI-P63,
ASD-STAN : TI-P63001.
Aeronavtika - Titanova zlitina Ti-4Al-4Mo-2Sn - Topilno žarjena in starana - Kovani izdelki - De ≤ 150 mm
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3351:2012SIST EN 3351:2014en01-marec-2014SIST EN 3351:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3351
October 2012 ICS 49.025.30 English Version
Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm
Série aérospatiale - Alliage de titane Ti-4Al-4Mo-2Sn - Mis en solution et revenu - Pièces forgées ou matricées - De ≤ 150 mm
Luft- und Raumfahrt - Titanlegierung Ti-4Al-4Mo-2Sn - Lösungsgeglüht und ausgelagert - Schmiedestücke - De ≤ 150 mm This European Standard was approved by CEN on 23 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3351:2012: ESIST EN 3351:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.