EN 4890:2022/A1:2024

SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Jeklo X4CrNiMo16-5-1 - Taljeno na zraku - Utrjeno in mehko žarjeno -
Pločevina in plošče - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa - Dopolnilo
A1
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered -
Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 - Lufterschmolzen - Gehärtet und
angelassen - Bleche und Platten - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à l'air - Trempé et revenu - Tôles et
plaques - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
Ta slovenski standard je istoveten z: EN 4890:2022/A1:2024
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4890:2022/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X4CrNiMo16-5-1 - Air melted -
Hardened and tempered - Sheets and plates - 0,3 mm  a 
50 mm - 900 MPa  Rm  1 050 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 - Élaboré à Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 -
l'air - Trempé et revenu - Tôles et plaques - 0,3 mm  a Lufterschmolzen - Gehärtet und angelassen - Bleche
 50 mm - 900 MPa  Rm  1 050 MPa und Platten - 0,3 mm  a  50 mm - 900 MPa  Rm  1
050 MPa
This amendment A1 modifies the European Standard EN 4890:2022; it was approved by CEN on 8 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedo
...