ENV 14464:2002
(Main)Sawn timber - Method for assessment of case-hardening
Sawn timber - Method for assessment of case-hardening
This European standard defines a destructive method of assessing the case hardening of a piece of timber with reference to the distorsion measured in a slice taken from the piece. This standard applies to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.
Schnittholz - Verfahren zur Ermittlung der Verschalung
Bois sciés - Méthode de mesure de la cémentation
Sawn timber - Method for assessment of case-hardening
General Information
- Status
- Withdrawn
- Publication Date
- 19-Nov-2002
- Withdrawal Date
- 20-Jul-2010
- Technical Committee
- CEN/TC 175 - Round and sawn timber
- Drafting Committee
- CEN/TC 175/WG 1 - General matters, definitions, measurement methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Jul-2010
- Completion Date
- 21-Jul-2010
Relations
- Effective Date
- 24-Jul-2010
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
ENV 14464:2002 is a standardization document published by the European Committee for Standardization (CEN). Its full title is "Sawn timber - Method for assessment of case-hardening". This standard covers: This European standard defines a destructive method of assessing the case hardening of a piece of timber with reference to the distorsion measured in a slice taken from the piece. This standard applies to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.
This European standard defines a destructive method of assessing the case hardening of a piece of timber with reference to the distorsion measured in a slice taken from the piece. This standard applies to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.
ENV 14464:2002 is classified under the following ICS (International Classification for Standards) categories: 79.040 - Wood, sawlogs and sawn timber. The ICS classification helps identify the subject area and facilitates finding related standards.
ENV 14464:2002 has the following relationships with other standards: It is inter standard links to CEN/TS 14464:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ENV 14464:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2003
Sawn timber - Method for assessment of case-hardening
Sawn timber - Method for assessment of case-hardening
Schnittholz - Verfahren zur Ermittlung der Verschalung
Bois sciés - Méthode de mesure de la cémentation
Ta slovenski standard je istoveten z: ENV 14464:2002
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN PRESTANDARD
ENV 14464
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
November 2002
ICS 79.040
English version
Sawn timber - Method for assessment of case-hardening
Bois sciés - Méthode de mesure de la cémentation Schnittholz - Verfahren zur Ermittlung der Verschalung
This European Prestandard (ENV) was approved by CEN on 23 September 2002 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 14464:2002 E
worldwide for CEN national Members.
Contents
Foreword.3
1 Scope .3
2 Normative references .3
3 Terms and definitions.3
4 Slicing test method.3
4.1 Apparatus .3
4.1.1 Calibrated measuring device.3
4.1.2 Jig .4
4.1.3 Slicing device .4
4.2 Procedure .4
4.3 Calculation and expression of the result .6
Foreword
This document ENV 14464:2002 has been prepared by Technical Committee CEN /TC 175, "Round and sawn
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...