ASTM D3622-05

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D3622 – 05
Standard Specification for
1
1-Propanol (n-Propyl Alcohol)
This standard is issued under the fixed designation D3622; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* Chemical Intermediates Used in Paint, Varnish, Lacquer,
and Related Products
1.1 This specification covers n-propyl alcohol (1-propanol)
D4052 Test Method for Density and Relative Density of
for use in paint, varnish, lacquer and related products.
Liquids by Digital Density Meter
1.2 The values stated in SI units are to be regarded as
D5386 Test Method for Color of Liquids Using Tristimulus
standard. No other units of measurement are included in this
Colorimetry
standard.
E1 Specification for ASTM Liquid-in-Glass Thermometers
1.3 The following applies to all specified limits in this
E29 Practice for Using Significant Digits in Test Data to
standard; for purposes of determining conformance with this
Determine Conformance with Specifications
standard, an observed value or a calculated value shall be
E300 Practice for Sampling Industrial Chemicals
rounded off “to the nearest unit” in the last right-hand digit
2.2 U.S. Federal Specification:
used in expressing the specification limit, in accordance with
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
the rounding-off method of Practice E29.
3
of
1.4 For specific hazard information and guidance, see the
supplier’s Material Safety Data Sheets for materials listed in
3. Properties
this specification.
3.1 n-propyl alcohol shall conform to the following require-
2. Referenced Documents ments:
2
Apparent specific gravity:
2.1 ASTM Standards:
20/20°C 0.804 to 0.807
D268 Guide for Sampling andTestingVolatile Solvents and
or
Chemical Intermediates for Use in Paint and Related 25/25°C 0.801 to 0.804
A
Color, Pt-Co scale, max 10
Coatings and Material
B
Distillation range
D1078 Test Method for Distillation Range of Volatile Or-
Nonvolatile matter, max, mg/100 mL 5
C
ganic Liquids
Odor
D
Water, max, weight % 0.1
D1209 Test Method for Color of Clear Liquids (Platinum-
E
Acidity (free acid as acetic), max, weight % 0.003
Cobalt Scale)
_____________
D1296 Test Method for Odor of Volatile Solvents and
A
Instrumental Pt-Co color determined byTest Method D5386 have been shown
Diluents to have no statistically significant difference from Pt-Co color determined by Test
Method D1209. However, it is not known whether 1–propyl alcohol was part of the
D1353 Test Method for Nonvolatile Matter in Volatile
sample set included in the interlaboratory study.
Solvents for Use in Paint, Varnish, Lacquer, and Related B
Shall distill entirely within a 2°C range which shall include 97.2°C.
C
Products Optional: Test for odor only when agreed upon as necessary between the
supplier and the customer.
D1364 Test Method for Water in Volatile Solvents (Karl
D
Thisquantitativewaterlimitensuresmiscibilitywithoutturbiditywhen1volume
Fischer Reagent Titration Method)
is diluted with 19 volumes of 99 % heptane at 20°C.
E
Equivalent to 0.028 mg of KOH per gram of material.
D1476 Test Method for Heptane Miscibility of Lacquer
Solvents
4. Sampling
D1613 Test Method for Acidity in Volatile Solvents and
4.1 This material shall be sampled in accordance with
Practice E300.
1
This specification is under the jurisdiction of ASTM Committee D01 on Paint
and Related Coatings, Materials, andApplications and is the direct responsibility of
5. Test Methods
Subcommittee D01.35 on Solvents, Plasticizers, and Chemical Intermediates.
5.1 The properties enumerated in this specification shall be
Current edition approved May 15, 2005. Published May 2005. Originally
´1
approved in 1977. Last previous edition approved in 2000 as D3622 – 95 (2000) determined in accordance with the following ASTM methods.
. DOI: 10.1520/D3622-05.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
Standards volume information, refer to the standard’s Document Summary page on Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://
the ASTM website. www.dodssp.daps.mil.
*ASummary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D3622 – 05
5.1.1 Apparent Specific Gravity—Determine the apparent 5.1.6 Water—Test Methods D1364 or D1476.
specific gravity by any convenient method that is accurate to 5.1.7
...