iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D3440-01

(Guide)

Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

SCOPE
1.1 This guide covers preparing specifications for water-emulsion floor polishes on all nonwood floors and for sealed wood floors.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
09-Oct-2001
ICS
71.100.99 - Other products of the chemical industry
Technical Committee
D21 - Polishes
Drafting Committee
D21.05 - Specifications
Current Stage
Ref Project

Relations

Replaces
ASTM D3440-82(1995) - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
Effective Date
10-Oct-2001
Replaced By
ASTM D3440-01(2007) - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
Effective Date
01-Feb-2007

Buy Standard

ASTM D3440-01 - Standard Guide for Preparing Specifications for Water-Emulsion Floor PolishesASTM D3440-01 - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
PreviousNext
Guide
ASTM D3440-01 - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 3440 – 01
Standard Guide for
1
Preparing Specifications for Water-Emulsion Floor Polishes
This standard is issued under the fixed designation D 3440; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
3
1. Scope D 3206 Test Method for Soil Resistance of Floor Polishes
D 3207 Test Method for Detergent Resistance of Floor
1.1 This guide covers preparing specifications for water-
3
Polish Films
emulsion floor polishes on all nonwood floors and for sealed
D 3210 Method of Comparing Colors of Films from Water-
wood floors.
3
Emulsion Floor Polishes
1.2 This standard does not purport to address all of the
E 70 Test Method for pH of Aqueous Solutions with the
safety concerns, if any, associated with its use. It is the
4
Glass Electrode
responsibility of the user of this standard to establish appro-
5
2.2 Federal Standards:
priate safety and health practices and determine the applica-
Federal Specification, Wax, Floor, Water-Emulsion
bility of regulatory limitations prior to use.
P-W155C, February 22, 1978
2. Referenced Documents
Federal Speicfication, Finish, Floor, Water-Emulsion
P-F00430C (GSA-FSS) October 26, 1978.
2.1 ASTM Standards:
D 1288 Test Method for Total Ash and Silica in Water-
3. Terminology
2
Emulsion Polishes
3.1 Definitions—For definitions of other terms used in this
D 1290 Test Method for Sediment in Water-Emulsion Pol-
3
guide refer to Terminology D 2825.
ishes by Centrifuge
3.1.1 specification—a precise statement of a set of require-
D 1455 Test Method for 60° Specular Gloss of Emulsion
3
ments to be satisfied by a material, product, system, or service,
Floor Polish
indicating, whenever appropriate the procedure by means of
D 1791 Test Method for Accelerated Aging of Liquid
3
which it may be determined whether the requirements given
Water-Emulsion Floor Polishes
are satisfied. As far as practicable, it is desirable that the
D 1792 Test Method for Long-Term Removability Proper-
3 requirements be expressed numerically in terms of units
ties of Emulsion Floor Polishes
together with their limits.
D 1793 Test Method for Water Spotting of Emulsion Floor
3
Polishes
4. Classification
D 2047 Test Method for Static Coefficient of Friction of
4.1 Buffıng-Type Floor Polish—A floor polish that requires
Polish-Coated Floor Surfaces as Measured by the James
3 buffing to maintain or enhance appearance, or both.
Machine
3 4.2 Self-Polishing-Type Floor Polish—A self-polishing-
D 2048 Test Method for Powdering of Floor Polish Films
type floor polish that dries to a shine.
D 2825 Terminology Relating to Polishes and Related Ma-
3
terials
5. Basis of Purchase
D 2834 Test Method for Nonvolatile Matter (Total Solids)
5.1 Reference Material—Afloor polish which the purchaser
in Water-Emulsion Floor Polishes, Solvent-Based Floor
3 has found to provide the desired characteristics in each of the
Polishes, and Polymer-Emulsion Floor Polishes
3 tests described and which is mutually agreed upon between the
D 3052 Practice for Rating Water-Emulsion Floor Polishes
purchaser and the seller, will be used as a reference material.
D 3153 Test Method for Recoatability of Water-Emulsion
3 Other polishes will be compared to this reference material for
Floor Polishes
performance.
1
This guide is under the jurisdiction of ASTM Committee D21 on Polishes and
is the direct responsibility of Subcommittee D21.05 on Specifications.
Current edition approved Oct. 10, 2001. Published December 2001. Originally
4
published as D 3440–76. Last previous edition D 3440–82 (1995). Annual Book of ASTM Standards, Vol 15.05.
2 5
Discontinued, see 1984 Annual Book of ASTM Standards, Vol 15.04. Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
3
Annual Book of ASTM Standards, Vol 15.04. Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D 3440
5.2 Qualification Sample—Seller shall submit a sample tance accessory (individual spectrophotometers have different
typical of the material he intends to supply for qualification accessories).Apply approximately 1 mLof floor polish with an
testing. eye dropper in a zig-zag pattern, and produce a uniform layer
5.3 Acceptance Sample—Samples shall be taken from each by means of a 2-in. (51-mm) doctor blade with 0.008-in.
shipment and examined for conformation to the qualification (0.20-mm) gap. The sample thus prepared is allowed to dry
sample. overnight before use.
8.1.2 Procedure—Run the spectrum of the coated foi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D3210-95(2023)(Test Method)
Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
5.1 Whiteness index obtained from reflectance measurements on exaggerated dried polish films on filter paper can be used as a measurement of the color of such films.  
5.2 Whiteness index may be useful in predicting the potential discoloring effect of polish films on flooring substrates.  
5.3 Whiteness index should be useful in specifications when color comparisons are made with a standard sample polish.
SCOPE
1.1 This test method covers comparing colors of films (or solids) deposited from the emulsified particles in water emulsion floor polishes. It is based upon luminous reflectance measurements made with tristimulus colorimeters such as the Hunter Color Difference Meter.2  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3209-93(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on floor polishes. It may be used to predict the stability of a floor polish when exposed to freezing.
SCOPE
1.1 This test method covers the determination of the stability of polymer emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1455-17(2023)(Test Method)
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

SIGNIFICANCE AND USE
4.1 This test method may be used to evaluate the difference in gloss of dried films of emulsion floor polishes when the light reflected at a 60° angle is measured. Extremely high- or low-gloss polishes may not be differentiated at a 60° angle. A20° angle measured in accordance with Test Method D523 may give better definition of gloss.
SCOPE
1.1 This test method covers the determination of the 60° specular gloss of films of emulsion floor polish after application to a substrate.  
Note 1: Specular gloss is one of several related appearance attributes that produce the sensation of glossiness. For this reason, specular gloss measurements may not always correlate well with visual rankings of glossiness.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1792-17(2023)(Test Method)
Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

SIGNIFICANCE AND USE
4.1 This test method is used to predict removability of floor polish after a treatment period that simulates aging in the field. It allows for uniform mechanical and detergent action leaving the only variable the actual removability of the polish.
SCOPE
1.1 This test method covers the determination of the relative ease of removal of dried films of water-emulsion floor polishes from common flooring substrates under accelerated conditions, which correspond to extended service aging.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4002-81(2023)(Practice)
Standard Practice for Evaluation of Buffable Shoe Polish

SIGNIFICANCE AND USE
3.1 This practice is intended to define the properties to be tested, the apparatus to use, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of shoe polish on what properties or performance characteristics are best for their products. This practice will be flexible to honor this fact within the confines of the shoe polish definition in 2.1.
SCOPE
1.1 This practice covers the definition of properties to test and the apparatus to use, in evaluating the performance of buffable shoe polishes.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D5678-17(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on wax emulsion floor polishes. It may be used to predict the stability of a floor polish in transit or when exposed to freezing, and whether or not the polish is damaged by freezing.
SCOPE
1.1 This test method covers the determination of the stability of wax emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3954-15(2022)(Test Method)
Standard Test Method for Dropping Point of Waxes

SIGNIFICANCE AND USE
4.1 Waxes do not go through a sharp solid-liquid phase change when heated and therefore do not have a true melting point. As the temperature rises, waxes gradually soften or become less viscous. For this reason, the determination of the softening point must be made by an arbitrary but closely defined method if test values are to be reproducible.  
4.2 This test is useful in determining the consistency of waxes, and as one element in establishing the uniformity of shipments or source of supply.  
4.3 This test method has been found suitable for all types of waxes including paraffin, microcrystalline polyethylene, and natural waxes.
SCOPE
1.1 This test method covers the determination of the ASTM dropping point for waxes.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2834-95(2022)(Test Method)
Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

SIGNIFICANCE AND USE
2.1 Nonvolatile matter determination is useful as a quality control test, when used in conjunction with other tests, to assure specification compliance.
SCOPE
1.1 This test method covers the determination of nonvolatile matter (total solids) in a water-emulsion, organic solvent-based liquid and paste floor polishes, and polymer-emulsion-type floor polishes.  
1.2 This test method recognizes that the products may contain material that will slowly volatilize or change chemically with a resulting change in weight of the nonvolatile matter. Therefore, since drying to constant weight is impractical, specific drying times have been selected.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1791-93(2022)(Test Method)
Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method is not absolute but does give an indication of the useful shelf-life of a liquid water-emulsion floor polish. Will indicate whether a polish will gel or remain a usable liquid over the desired storage life of the product. It should be noted that polishes of different composition types will vary in useful storage life under identical storage conditions.
SCOPE
1.1 This test method covers the storage stability of liquid water-emulsion floor polishes.  
1.2 Storage for 30 days at 52 °C (125 °F), while not a guarantee of one year stability at 21 °C (70 °F), is believed to be a more reliable indicator of storage stability than similar tests of shorter duration.  
Note 1: The 60° specular gloss on black glass determined by Test Method D1455, may be used to confirm this observation. A substantial difference in gloss between aged and unaged samples is an indication of instability. A shelf stability of one year can be reasonably expected of the material in question if duplicate samples remain unchanged for 30 days at 52 °C ± 1.1 °C (125 °F ± 2 °F). If one or both duplicates show more than slight viscosity increases or slight creaming, other evidence of stability must be sought.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3564-22(Practice)
Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

SIGNIFICANCE AND USE
2.1 Vinyl composition tile or flooring consists of vinyl resins (suitably plasticized and stabilized) fortified with composition fibers, mineral fillers, and prime pigments. In some cases, all or part of the wearing surfaces may consist of unfilled vinyl resin that is clear or translucent. Metallic accents (chips, pigment, etc.) are frequently used to form the overall design. In general, the overall binder content is lower than that of homogeneous vinyl tile. For the purpose of this practice, vinyl composition also includes vinyl asbestos tile.
SCOPE
1.1 This practice covers the application of floor polishes to maintain vinyl composition tile or flooring. Floor polishes are applied to vinyl composition tile floors for protection and beautification of the floor surface. Cleaning, polish application, removal, and maintenance procedures are important functions in this process.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off