iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1950-99

(Specification)

Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices (Withdrawn 2008)

Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices (Withdrawn 2008)

SIGNIFICANCE AND USE
2.1 The purpose of this specification is to provide to the new owner of an amusement ride or device, available information for the identification, placement, erection, operation, and maintenance of the amusement ride or device.
SCOPE
1.1 This specification covers the requirements for information that shall supplement the sale or transfer of ownership of an amusement ride or device.
1.2 This specification applies only to amusement rides and devices, which have previously been in operation, and which are beign sold or transferred as a used amusment ride or device.
WITHDRAWN RATIONALE
This specification covers the requirements for information that shall supplement the sale or transfer of ownership of an amusement ride or device.
Formerly under the jurisdiction of Committee F24 on Amusement Rides and Devices, this specification was withdrawn in September 2008 in accordance with section 10.5.3.1 of Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

General Information

Status
Withdrawn
Publication Date
09-Jan-1999
Withdrawal Date
04-Sep-2008
ICS
97.200.99 - Other equipment for entertainment
Technical Committee
F24 - Amusement Rides and Devices
Drafting Committee
F24.20 - Specifications and Terminology
Current Stage
Ref Project

Relations

Referred By
ASTM F2959-23a - Standard Practice for Aerial Adventure Courses
Effective Date
10-Jan-1999
Referred By
ASTM F1193-23 - Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
Effective Date
10-Jan-1999

Buy Standard

ASTM F1950-99 - Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices (Withdrawn 2008)ASTM F1950-99 - Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices (Withdrawn 2008)
PreviousNext
Technical specification
ASTM F1950-99 - Standard Specification for Physical Information to be Transferred With Used Amusement Rides and Devices (Withdrawn 2008)
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F 1950 – 99
Standard Specification for
Physical Information to be Transferred With Used
1
Amusement Rides and Devices
This standard is issued under the fixed designation F 1950; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope the seller has made or caused to be made, and component
operational and maintenance manuals in the seller’s posses-
1.1 This specification covers the requirements for informa-
sion.
tion that shall supplement the sale or transfer of ownership of
3.2 Purchaser’s Responsibility:
an amusement ride or device.
3.2.1 The purchaser of a used amusement ride or device
1.2 This specification applies only to amusement rides and
shall notify the original manufacturer of the ride or device
devices, which have previously been in operation, and which
being purchased of the change in ownership of the ride or
are being sold or transferred as a used amusement ride or
device.
device.
3.2.2 The purchaser shall request from the original manu-
2. Significance and Use facturer all updated owner, operational, and maintenance
manuals and service bulletins.
2.1 The purpose of this specification is to provide to the new
3.3 Manufacturer’s Responsibility:
owner of an amusement ride or device, available information
3.3.1 The original manufacturer of the used amusement ride
for the identification, placement, erection, operation, and
or device being sold shall make available, upon request by the
maintenance of the amusement ride or device.
purchaser, owner, operational, and maintenance information
3. Information Requirements
along with updates, if any.
3.3.2 The original manu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F747-23(Terminology)
Standard Terminology Relating to Amusement Rides and Devices

SCOPE
1.1 This terminology is a repository of terms approved by Committee F24 and its subcommittees. Reproducing terms approved within all other individual F24 standards and guides, this terminology will provide a single location where terms related to amusement rides and devices are freely accessible to the public, committee members and can be maintained, updated and utilized as effective communication tools. Although published alphabetically, terms unique to a specific F24 standard or guide are indicated as such by the reference which follows the applicable term.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM F3054-23(Practice)
Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to delineate information and to establish procedures for the operation of an amusement railway ride.  
4.2 The user of this standard shall be required to review and comply with the referenced “core” ASTM Committee F24 standards in Subsection 2.1 of this standard. Modified or alternate requirements to those standards may be required in this standard.
SCOPE
1.1 This practice applies to operations of amusement railway ride(s) that have a track gauge greater than or equal to 12 in. (305 mm) measured between the heads of the rails. This excludes patron powered ride vehicles specifically designed for children.  
1.2 This standard does not apply to the operation of rides, such as roller coasters, that resemble railways, but fall within the scope of Practice F2291-22a or Practice F1159-16ε1. This standard also does not apply to funiculars as defined in ANSI B77.2-20 or BS EN 1907-17.  
1.3 This standard does not apply to amusement railway rides operation that are intended for use as a portable amusement ride or attraction.  
1.4 This standard does not apply to permanently installed amusement railway rides and tourist railways, and their associated track, devices and facilities that are under the jurisdiction of the Federal Railroad Administration (FRA) in whole or part or national equivalent.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM F770-23(Practice)
Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to delineate information and to establish procedures for the operation, maintenance, inspection, and training for amusement rides and devices.
SCOPE
1.1 This practice provides guidelines for operations, maintenance, and inspection procedures for amusement rides and devices to be performed by the owner/operator.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F2960-23(Practice)
Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices

SIGNIFICANCE AND USE
4.1 The user of this standard shall be required to review and comply with the referenced “core” ASTM F24 Committee standards in 2.1 of this standard. Modified or alternate requirements to those standards may be required in this standard.  
4.1.1 Amusement railway sub-systems may be built to various scales, that is, rolling stock maybe to one scale and the track to another but have common gauge. The railroad’s documentation or maintenance manuals shall identify the railroad standards of the respective subsystems/interfaces.  
4.1.2 The Designer/Engineer’s requirements shall consider the track equipment manufacturer’s and rolling stock manufacturer’s requirements and shall determine their appropriate interfaces.
SCOPE
1.1 This standard applies to design, manufacture, installation, operation, maintenance, and inspection of permanent amusement railway ride(s) that have a track gauge greater than or equal to 12 in. (305 mm) measured between the heads of the rails and their related devices and facilities, for example, bridges, tunnels, and signal support structures, excluding rolling stock. This “track” specific standard provides requirements which are not covered in the “core” or “supporting” standards of the ASTM F24 committee.  
1.2 This standard does not apply to track rides, such as roller coasters, that may resemble railways.  
1.3 This standard does not apply to funiculars as defined in ANSI B77.2 (2020) or BS EN 1907 (2017).  
1.4 This standard does not apply to Amusement Railway Rides and their associated track, devices and facilities that are manufactured and intended for use as a portable amusement ride or attraction.  
1.5 This standard does not apply to permanently installed amusement railway rides and tourist railways, and their associated track, devices and facilities that are under the jurisdiction of the United States Federal Railroad Administration (FRA) in whole or part, or national equivalent.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    40 pages
    English language
    sale 15% off
ASTM
ASTM F1193-23(Practice)
Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

SIGNIFICANCE AND USE
3.1 The purpose of this practice is to provide the minimum manufacturing requirements for amusement rides and devices and to provide the minimum requirements for a written quality assurance program for an amusement ride or device manufacturer, or component supplier. This is not intended to include suppliers of off-the-shelf components (for example, fasteners, electrical wire).
SCOPE
1.1 This practice establishes the minimum requirements for a quality assurance program and the manufacturing of amusement rides and devices (including major modifications).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
ASTM
ASTM F3214-23(Practice)
Standard Practice for Characterization of Fire Properties of Seating, Upholstery, and Padding Materials for Vehicles Associated with Amusement Rides and Devices

SIGNIFICANCE AND USE
4.1 This practice requires that seating, upholstery, and padding materials used for vehicles associated with amusement rides and devices exhibit adequate smoldering ignition properties.  
4.1.1 Noncombustible materials are permitted to be used as seating, upholstery, and padding materials, and do not require testing for smoldering ignition.  
4.2 The structural components or framing associated with a vehicle or ride are not considered seating, upholstery, or padding materials.  
4.3 Annex A1 provides an optional open flame test suitable for seat padding materials.  
4.4 Appendix X1 provides non-mandatory guidance for conducting an analysis of fire scenarios associated with the operation of vehicles associated with amusement rides and devices. The conduction of a fire hazard analysis is not a requirement of this practice. The purpose of Appendix X1 is to provide manufacturers, owners, and operators with criteria and references for fire properties of materials used in vehicles either following construction or major modifications of an amusement ride or device.  
4.5 This practice does not address the probability of occurrence of a hazardous event in any fire scenario associated with amusement rides or devices. Thus, this practice does not address the potential risk associated with any fire scenario. Practice F2291-21 includes general requirement to assess and mitigate hazards for all rides and devices.  
4.6 The requirements in this practice are not intended to supersede any additional or alternate requirements provided by the authority having jurisdiction.
SCOPE
1.1 This practice describes the required smoldering ignition fire properties for seating, upholstery, and padding materials used for vehicles associated with amusement rides and devices.  
1.2 This practice includes an annex with an example of an optional open flame test method for padding materials.  
1.3 This practice also contains a non-mandatory appendix with optional guidance for the procedure to follow in the event that an optional fire hazard analysis is to be conducted for vehicles used on amusement rides and devices.  
1.3.1 In the event that such a fire hazard analysis is to be conducted, it needs to include considerations related to heat release, smoldering, and flaming ignition, flame spread and smoke release.  
1.3.2 The appendix contains specific recommendations of standardized fire test methods that are suitable (but not required) for determining material properties related to heat release rates, smoldering, and flaming ignition, flammability, and smoke release for materials.  
1.4 This practice is not a fire test method.  
1.5 This practice does not require the conduction of a fire hazard analysis.  
1.6 This practice does not address the use of active fire protection measures, such as fire sprinklers, or smoke, fire, or heat detectors.  
1.7 This practice does not address the probability of any fire scenario associated with amusement rides or devices resulting in a hazardous event. Thus, this practice does not address the potential risk associated with any fire scenario. Practice F2291-21 includes general requirement to assess and mitigate hazards for all rides and devices.  
1.8 This practice shall not apply to:  
1.8.1 Materials specified for amusement rides or devices other than those associated specifically with the ride vehicle assembly.  
1.8.2 Materials used for the construction of facilities.  
1.8.3 Fluids and lubricants.  
1.8.4 Vehicles used on water slides or other aquatic devices.  
1.9 The values stated in SI units, see IEEE/ASTM SI-10-16, are to be regarded as standard. The values given in parentheses, if any, after SI units are provided for information only and are not considered standard.  
1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safet...

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM F747-22(Terminology)
Standard Terminology Relating to Amusement Rides and Devices

SCOPE
1.1 This terminology is a repository of terms approved by Committee F24 and its subcommittees. Reproducing terms approved within all other individual F24 standards and guides, this terminology will provide a single location where terms related to amusement rides and devices are freely accessible to the public, committee members and can be maintained, updated and utilized as effective communication tools. Although published alphabetically, terms unique to a specific F24 standard or guide are indicated as such by the reference which follows the applicable term.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM F770-22(Practice)
Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to delineate information and to establish procedures for the operation, maintenance, inspection, and training for amusement rides and devices.
SCOPE
1.1 This practice provides guidelines for operations, maintenance, and inspection procedures for amusement rides and devices to be performed by the owner/operator.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F1193-22(Practice)
Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

SIGNIFICANCE AND USE
3.1 The purpose of this practice is to provide the minimum manufacturing requirements for amusement rides and devices and to provide the minimum requirements for a written quality assurance program for an amusement ride or device manufacturer, or component supplier. This is not intended to include suppliers of off-the-shelf components (for example, fasteners, electrical wire).
SCOPE
1.1 This practice establishes the minimum requirements for a quality assurance program and the manufacturing of amusement rides and devices (including major modifications).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM F2974-22(Practice)
Standard Practice for Auditing Amusement Rides and Devices

SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide the minimum auditing requirements for audits of amusement rides and devices.  
4.2 An audit can include inspections, evaluations, or examinations during the design, manufacturing, installation, commissioning, operation, or major modification of an amusement ride or device.  
4.3 When audits are performed, they shall occur during the relevant stages of an amusement ride or device’s design, manufacture, installation, commissioning or major modification. This practice does not require recurring design, manufacturing, installation, commissioning, or major modification audits.
SCOPE
1.1 This practice establishes minimum requirements for auditing conformance to ASTM Committee F24 Standards during an audit of an amusement ride or device within a defined scope.  
1.2 Defined scope of audit shall include but not be limited to the following:  
1.2.1 Auditors sufficient relevant education, training, technical knowledge, certifications as appropriate, and experience to properly audit an amusement ride or device in accordance with subsection 5.1 of this standard.  
1.2.2 Visual acuity requirements (if applicable) in accordance with subsection 5.1.3 of this standard.  
1.2.3 Reference standards including published year.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off