ASTM D1719-95(1999)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 1719 – 95 (Reapproved 1999)
Standard Specification for
,
1 2
Isobutyl Alcohol
This standard is issued under the fixed designation D 1719; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 2.2 U.S. Federal Specification:
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
1.1 This specification covers isobutyl alcohol for use in
of
paint, varnish, lacquer, and related products.
1.2 For specific hazard information and guidance, see the
3. Properties
supplier’s Material Safety Data Sheets for materials listed in
3.1 Isobutyl alcohol shall conform to the following require-
this specification.
ments:
2. Referenced Documents
Apparent specific gravity:
20/20°C 0.802 to 0.804
2.1 ASTM Standards:
25/25°C 0.794 to 0.801
D 268 Guide for Sampling and Testing Volatile Solvents Color, Pt-Co Scale, max 10
A
Distillation range
and Chemical Intermediates for Use in Paint and Related
Nonvolatile matter, max, g/100 mL 0.005
Coatings and Materials B
Water, max, weight % 0.2
C
D 1078 Test Method for Distillation Range of Volatile
Acidity (free acid as acetic), max, 0.003
weight %
Organic Liquids
______________
D 1209 Test Method for Color of Clear Liquids (Platinum-
A
Shall distill entirely within a 2°C range which shall include 107.9°C.
Cobalt Scale) B
This quantitative water limit ensures that the material is miscible without
D 1353 Test Method for Nonvolatile Matter in Volatile turbidity with 19 volumes of 99 % heptane at 20°C.
C
Equivalent to 0.028 mg of KOH per gram of sample.
Solvents for Use in Paint, Varnish, Lacquer, and Related
Products
4. Sampling
D 1364 Test Method for Water in Volatile Solvents (Karl
4.1 This material shall be sampled in accordance with
Fischer Reagent Titration Method)
Practice E 300.
D 1476 Test Method for Heptane Miscibility of Lacquer
Solvents
5. Test Methods
D 1613 Test Method for Acidity in Volatile Solvents and
5.1 The properties enumerated in this specification shall be
Chemical Intermediates Used in Paint, Varnish, Lacquer,
determined in accordance with the following ASTM methods.
and Related Products
5.1.1 Apparent Specific Gravity—Determine the apparent
D 4052 Test Method for Density and Relative Density of
specific gravity by any convenient method that is accurate to
Liquids by Digital Density Meter
the third decimal place, the temperature of both material and
E1 Specification for ASTM Thermometers
water being 20 or 25°C. See Guide D 268 or Test Method
E 300 Practice for Sampling Industr
...