ASTM B936-13

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B936 − 08 B936 − 13
Standard Specification for
Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip
1
and Rolled Bar
This standard is issued under the fixed designation B936; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification establishes the requirements for Copper Alloy UNS No. C18080 for plate, sheet, strip, and rolled bar in
alloy.bar.
NOTE 1—Since Copper Alloy UNS No. C18080 is frequently used in a variety of applications where yield strength and stress-corrosion resistance may
be critical, it is recommended that drawings or samples of the part to be fabricated and details of application be submitted for use in establishing temper
and treatment of material.
NOTE 2—Copper Alloy UNS No. C18080 is covered by a patent. Interested parties are invited to submit information regarding the identification of an
alternative(s) to this patented item to ASTM International headquarters. Your comments will receive careful consideration at a meeting of the responsible
1
technical committee, which you may attend.
1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are
mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents
2.1 The following documents of the issue in effect on the date of material purchase form a part of this specification to the extent
referenced herein:
2
2.1 ASTM Standards:
B248 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
(Metric)
B601B846 Classification for Temper Designations for Terminology for Copper and Copper Alloys—Wrought and CastAlloys
B846B950 Terminology for Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials
3
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010)
3
E76 Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
E255 Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E478 Test Methods for Chemical Analysis of Copper Alloys
E1473 Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
3. General Requirements
3.1 The following sections of SpecificationSpecifications B248 and B248M constitute a part of this specification:
3.1.1 Terminology—Definitions,
3.1.2 Materials and Manufacturing,Manufacture,
3.1.3 Workmanship, Finish, and Appearance,
3.1.4 Sampling, except for chemical analysis,
3.1.5 Number of Tests and Retests,
3.1.6 Specimen Preparation,
1
This specification is under the jurisdiction of ASTM Committee B05 on Copper and Copper Alloys and is the direct responsibility of Subcommittee B05.01 on Plate,
Sheet, and Strip.
Current edition approved Oct. 1, 2008Oct. 1, 2013. Published November 2008October 2013. Originally approved in 2004. Last previous edition approved in 20052008
ε1
as B936 – 04B936 – 08. . DOI: 10.1520/B0936-08.10.1520/B0936-13.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B936 − 13
3.1.7 Test Methods, except for chemical analysis,
3.1.8 Significance of Numerical Limits,
3.1.9 Inspection,
3.1.10 Rejection and Rehearing,
3.1.11 Certification,
3.1.12 Mill Test Reports (Mill),Report,
3.1.13 Packaging and Package Marking, and
3.1.14 Supplementary Requirements.
3.2 In addition, when a section with a title identical to that referenced in 3.1 appears in this specification, it contains additional
requirements which supplement those appearing in SpecificationSpecifications B248 and B24
...