75.180.20 - Processing equipment

This document specifies the minimum technical requirements for surface preparation, materials, application, inspection and testing of internal coating and lining systems that are intended to be applied on internal surfaces of process vessels that are subject to marked pressure/temperature changes and/or potentially corrosive conditions or processes and aggressive chemicals, used in the oil and gas industry.
This document covers both new construction and maintenance works of process vessels as w...view more

This document specifies the requirements for a series of compact steel gate, globe and check valves for
petroleum and natural gas industry applications.
It is applicable to valves of:
— nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100,
— corresponding to nominal pipe sizes NPS ¼, ⅜, ½, ¾, 1, 1¼, 1½, 2, 2½, 3 and 4,
— pressure designations PN 16, 25, 40, 63, 100, 250 and 400, and
— pressure designations Class 150, 300, 600, 800, 1 500 and 2 500.
Class 800 is not a listed clas...view more

This document is applicable to pressure-relieving and vapour depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, Liquefied Natural Gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations.
This document supplements API Std 521, 6th edition (2...view more

This document specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications. It is applicable to valves of: — nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100, — corresponding to nominal pipe sizes NPS Ľ, ⅜, ˝, , 1, 1Ľ, 1˝, 2, 2˝, 3 and 4, — pressure designations PN 16, 25, 40, 63, 100, 250 and 400, and — pressure designations Class 150, 300, 600, 800, 1 500 and 2 500. Class 800 is not a listed class design...view more

This document specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions can indicate a need for full port openings, heavy wall sections and large stem diameters. This document sets forth the requirements for the following gate valve features: — bolted bonnet; — outside screw and yoke; — rising stems; — non-rising handwheels; — single or double gate; — wedge or paralle...view more

This document specifies requirements and gives recommendations for the mechanical design,
material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat
exchangers for the petroleum, petrochemical and natural gas industries.
This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable
with the exceptions specified in this document.
This document is applicable to the following types of shell-and-tube heat exchan...view more

This document is applicable to pressure-relieving and vapour depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, Liquefied Natural Gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations. This document supplements API Std 521, 6th edition (20...view more

This document specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable with the exceptions specified in this document.
This document is applicable to the following types of shell-and-tube heat exchanger...view more

This document specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable with the exceptions specified in this document. This document is applicable to the following types of shell-and-tube heat exchangers:...view more

This document specifies the minimum technical requirements for surface preparation, materials, application, inspection and testing of internal coating and lining systems that are intended to be applied on internal surfaces of process vessels that are subject to marked pressure/temperature changes and/or potentially corrosive conditions or processes and aggressive chemicals, used in the oil and gas industry. This document covers both new construction and maintenance works of process vessels as we...view more

ISO 19901-2:2017 contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on floating structures and partially buoyant structures are briefly discussed. The site-specific assessment of jack-ups in elevated condition is only covered in ISO 19901-2:2017 to the extent that th...view more

This document gives requirements and recommendations for the qualification and design, installation,
testing and inspection for the external application of composite repair systems to corroded or damaged
pipework, pipelines, tanks and vessels used in the petroleum, petrochemical and natural gas industries.

ISO 24817:2017 gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repair systems to corroded or damaged pipework, pipelines, tanks and vessels used in the petroleum, petrochemical and natural gas industries.

ISO 24817:2017 gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repair systems to corroded or damaged pipework, pipelines, tanks and vessels used in the petroleum, petrochemical and natural gas industries.

This part of ISO 10439 specifies minimum requirements and gives recommendations for axial compressors,
single-shaft, and integrally geared process centrifugal compressors and expander-compressors for
special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural
gas industries. This part of ISO 10439 specifies requirements for expander-compressors, in addition to
the general requirements specified in ISO 10439-1:2015.
This scope covers only expander...view more

This International Standard specifies minimum requirements and gives recommendations for axial
compressors, single-shaft, and integrally geared process centrifugal compressors, and expandercompressors
for special purpose applications that handle gas or process air in the petroleum,
petrochemical, and natural gas industries. This part of ISO 10439 specifies general requirements
applicable to all such machines.
This International Standard does not apply to fans (these are covered by API 673) ...view more

This part of ISO 10439 specifies minimum requirements and gives recommendations for axial compressors,
single-shaft, and integrally geared process centrifugal compressors and expander-compressors for
special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural
gas industries. This part of ISO 10439 specifies requirements for non-integrally geared centrifugal and
axial compressors, in addition to the general requirements specified in ISO 10439-1. Th...view more

This part of ISO 10439 specifies minimum requirements and gives recommendations for axial
compressors, single-shaft and integrally geared process centrifugal compressors, and expandercompressors
for special purpose applications that handle gas or process air in the petroleum,
petrochemical, and natural gas industries. This part of ISO 10439 specifies integrally geared centrifugal
compressors in conjunction with ISO 10439‑1.
NOTE 1 See API 672 for packaged plant instrument air compressors.
...view more

ISO 10439-3:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-4:2015 specifies integrally geared centrifugal compressors in conjunction with ISO 10439‑1.

ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines.
ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 k...view more