25.080.10 - Lathes

This document specifies, with reference to ISO 230-1, the geometric tests on normal accuracy numerically controlled (NC) turning machines and turning centres with horizontal work spindles as defined in 3.1 and 3.2. It also specifies the applicable tolerances corresponding to the above-mentioned tests. Where applicable, this document also applies to horizontal spindle turret and single spindle automatic lathes. This document explains different concepts or configurations and common features of NC ...view more

This International Standard specifies the requirements and/or measures to eliminate the hazards or
reduce the risks in the following groups of turning machines and turning centres, which are designed
primarily to shape metal by cutting.
— Group 1: Manually controlled turning machines without numerical control.
— Group 2: Manually controlled turning machines with limited numerically controlled capability.
— Group 3: Numerically controlled turning machines and turning centres.
— Group 4: Sin...view more

ISO 23125:2014 specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of turning machines and turning centres, which are designed primarily to shape metal by cutting.
Group 1: Manually controlled turning machines without numerical control.
Group 2: Manually controlled turning machines with limited numerically controlled capability.
Group 3: Numerically controlled turning machines and turning centres.
Group 4: Single- or multi-spindl...view more

Specifies both geometrical and practical tests on these parallel lathes, and gives the corresponding permissible dviations which apply. It deals only with verification of the accuracy of the machine. It does not apply tothe testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested. This fourth edition cancels and replaces the third edition ...view more

Describes both special tests and practical tests for hydraulic and electric servo-controlled copying attachments (not for mechanically controlled ones) of general-purpose normal precision (centre lathes, vertical boring machines, capstan lathes or others) and copying lathes. The tests are intended to supplement the tests for the various types of lathes. It also applies to lathes with single-axis copying systems and to lathes where two axes are used in conjunction to produce a profile of up to 18...view more

Defines the machining processes that can be carried out on these turning and boring lathes. Describes the different types of machines. Gives the nomenclature for these machines in English, French and Russian as well as in German, Italian and Swedish. ISO 3655 specifies both geometrical and practical tests on these general purpose and normal accuracy machines, and gives the corresponding permissible deviations which apply. It deals only with the verification of the accuracy of the machine. Does n...view more

The scope should not be regarded as restricted to lathes only, but may be extended to all the other machine tools with centres of the same type. Specifies designation and sizes in millimetres and in inches.