TP085 - Pravilnik o ugotavljanju skladnosti vozil

ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories.
ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number of personnel.
Laboratory customers, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others use ISO/IEC 17025:2017 in confirming or recognizing the competence of laboratories.

ISO 10571:2016 specifies the designation, dimensions, load ratings and reference speed for tyres and rims fitted to vehicles, such as all-terrain equipment, mobile cranes, crash tenders, etc., likely to operate on highway over long distances at reference speed and under constant load.

This International Standard defines terms corresponding to, and gives guidance for the classification of,
mobile and self-propelled machinery used in forestry and related operations. Both the definitions and the
classification have been determined according to the end use of the machines as intended by the
manufacturer. The terms and definitions do not cover all possible forestry and related operations or machinery,
nor do they describe specific machines, but are given as an aid to nomenclature.
This International Standard is applicable to machines designed for use in forestry for site preparation, planting,
harvesting, processing, and the transport of wood and wood fibre. It is not applicable to machines designed to
be used exclusively in sawmills or wood yards, to on-highway transport vehicles, or to aerial vehicles.

This International Standard gives terms and definitions and an identification structure for classifying earthmoving machinery designed to perform the following operations: - excavation, - loading, - transportation, and - drilling, spreading, compacting or trenching of earth and other materials, for example, during work on roads and dams, and on building sites. The purpose of this International Standard is to provide a clear means of identifying machines according to their function and design configurations. Annex A provides a procedure based on the identification structure used by this International Standard for classifying the machinery and for introducing detailed identifications consistent with the logic implied by the structure. Annex B provides a hierarchy of the operator control configurations for earth-moving machinery. The Bibliography provides a list of terminology standards for many of the machine families identified in this International Standard. Included in those terminology standards are figures depicting different configurations of the machine types in each machine family.

This part of ISO 10542 specifies design and performance requirements and associated test methods for wheelchair tiedown and occupant-restraint systems (WTORS), as well as requirements for product marking and labelling and manufacturers' instructions and warnings to installers and consumers. It is applicable to all WTORS that use belt-type occupant restraints that are intended for occupied wheelchairs used as forward-facing seats by passengers and drivers of motor vehicles. This part of ISO 10542 is applicable to WTORS intended for use with all types of manual and powered wheelchairs, including three- and four-wheeled scooters, used by children and adults with a body mass equal to or greater than 22 kg. It is applicable also to WTORS designed for limited use with a particular make or model of wheelchair. This part of ISO 10542 is applicable primarily to complete WTORS, but portions can also be applied to components and subassemblies sold separately and for replacement parts.

This International Standard contains requirements for the competence of bodies performing inspection and for the impartiality and consistency of their inspection activities. It applies to inspection bodies of type A, B or C, as defined in this International Standard, and it applies to any stage of inspection.

Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision of EN ISO 9001:1994, incorporating EN ISO 9002 and EN ISO 9003 ++ (CC/981112) ++ Resolution BT 59/1999 : · the relationship between EN ISO 9001: 2000 and modules ++ H, D and E - as defined in Council decision 93/465/EEC - shall be described in a ++ European foreword (an option preferred to an informative annex), in line with ++ the request of the mandate. This foreword is to be drafted by BT/WG 107, and is ++ to be circulated for comments to CEN member bodies in parallel with the enquiry on prEN ISO 9001:2000. (MCH 2000-01-20)

This document specifies general requirements that a third party body operating quality system certification/registration shall meet, if it is to be recognized as competent and reliable in the operation of quality system certification/ registration. Note: In some countries, the bodies which verify conformity of quality systems to specified standards are called "certification bodies", in others "registration bodies", in others "assessment and registration bodies" or "certification/registration bodies", and in others still, "registrars".